9(E)
Attaching the microphone to the cradle suspension
Using the optional CRS-3P Cradle Suspension and
microphone holder (A) will reduce noise caused by
vibration.
1
Combine together the CRS-3P
Cradle Suspension and the
microphone holder (A) (Part
No. 3-680-581-01).
2
Loosen the screw on the
microphone holder on the
viewfinder, and open the
holder.
3
Attach the microphone holder
(A) and cradle suspension
combined in Step
1
to the
microphone holder on the
viewfinder, then close the
holder and tighten the screw.
4
Attach the microphone to the
cradle suspension. Insert the
microphone plug into the MIC
connector on the camera, or the
MIC IN connector on the
camera adaptor.
See the manual supplied with the CRS-3P for instructions on
how to attach the microphone to the cradle suspension.
When connecting the microphone to the camera adaptor,
you will need to set the microphone selector. For details,
see the manual supplied with your camera adaptor.
CRS-3P Cradle Suspension
(not supplied)
Microphone holder (A)
(Part No. 3-680-581-01)
