4(E)
1
Plug
Connect to the VF connector on the camera.
2
Stopper
Prevents the viewfinder from coming off the camera
when it is slid from side to side.
3
Tally indicator (rear)
Lights up when the camera receives a tally control
signal. This indicator can be covered when not in use.
4
Diopter adjustment ring
Allows for optimal foucus adjustment.
5
Tally indicator (front)
Lights up when the camera receives a tally control
signal. Set the TALLY switch
9
to OFF when not in
use. The brightness can also be adjusted with the
TALLY switch
9
.
6
PEAKING control
Turning this control clockwise adjusts the picture
sharpness, and makes focusing easier. This control has
no effect on the output signals of the camera.
7
CONTRAST control
Adjusts the contrast of the screen. This control has no
effect on the output signals of the camera.
8
BRIGHT control
Adjusts the brightness of the screen. This control has
no effect on the output signals of the camera.
9
TALLY switch
Controls the tally indicator
5
located on the front of
the viewfinder.
HIGH: The tally indicator brightness is set to high.
OFF: The tally indicator is disabled.
LOW: The tally indicator brightness is set to low.
0
ZEBRA (zebra pattern) switch
Controls the zebra pattern display on the viewfinder
screen as follows:
ON: A zebra pattern appears and stays.
OFF: The zebra pattern disappears.
MOMENT: A zebra pattern appears and stays for
about 5 seconds.
qa
DISPLAY/ASPECT switch
Turns the marker indication on and off, and switches
between 4:3 and 16:9 aspect ratios for viewfinder
screen display.
DISPLAY: When the marker indication is enabled
with the camera, the marker indication on the
viewfinder screen turns on and off every time you
push the switch up to this position.
ASPECT: Each push of the switch down to this
position toggles the mask display on and off.
Location and Function of Parts
