Sony HDR-AS20, Руководство пользователя

Страница: 37 / 71

Ta
bl
e of
con
ten
ts
O
p
era
tio
n
Sea
rch
Set
tings
Se
ar
c
h
In
dex
37 GB
The Adhesive Mount is used for fixing the Waterproof Case to an item you intend to use. The
Adhesive Mount is a general term for the Attachment Buckle, Flat Adhesive Mount, and Curved
Adhesive Mount. Insert the camera in the Waterproof Case before attaching.
Attachment method
1
Align the tripod screw hole in the bottom of
the Waterproof Case with the tripod screw
hole of the Attachment Buckle, and fix firmly
with the tripod screw.
• Confirm that the assembly is fixed securely.
2
Attach the Attachment Buckle (with the
Waterproof Case set in step 1) to the Flat
Adhesive Mount or Curved Adhesive Mount by
sliding it until it clicks into place.
3 In an environment at room temperature (20°C
(68°F) or above), completely remove dust,
moisture and oily substances from the surface where the Adhesive Mount
is to be attached.
4
Peel off the release paper on the back, and fix the Adhesive Mount in the
desired location.
• Adhesive power reaches its maximum strength 24 hours after the Adhesive Mount is attached to the
desired location.
Adhesive Mount (VCT-AM1)
Attachment Buckle Flat Adhesive Mount Curved Adhesive Mount
Tripod
screw
Positioning pin
z To attach to or detach from the Attachment Buckle
Press and hold the circled part to unlock, then slide it
in the opposite direction of step 2.
Continued r