Locations and Functions of Parts
20
Rear panel
a
HDCU (HD Camera Control Unit) connector
(optical fiber connector)
This is an optical fiber connector for the link to the HD
Camera Control Unit. Power, control signals, video
signals, audio signals etc. can be carried over a single link.
Note
When there is dust or other contamination on the
connection face for the optical fiber cable, transmission
errors will occur. Be sure to protect the connector with the
supplied cover when not in use.
b
CAMERA/HDTX (Camera/HD Triax Camera
Adaptor) connector (Triax connector)
This is a Triax cable connector for the link to the HD Triax
Camera or HD Triax Camera Adaptor HDTX100.
c
AC IN connector
Use the supplied power cord to connect this to an AC
outlet. The supplied plug holder can be used to fasten the
power cord to the unit.
HDTX100
Front panel
a
CAM POWER (camera power) indicator
Indicates the power supply status of the video camera.
Green:
The indicator is lit in green when power is
being supplied to the video camera.
Red:
The indicator is lit in red when the
CAMERA POWER switch at the Remote
Control Panel, Master Setup Unit, or HD
Camera Control Unit is set to OFF.
Flashing red:
Shows the condition of optical signal
reception at the rear-panel CAMERA
connector for the video camera. When there
is a problem, the indicator flashes. Fast
flashing indicates a hazard-level problem,
and slow flashing indicates an alert-level
problem.
Rear panel
a
CAMERA connector (optical fiber connector)
This is an optical fiber connector for the link to the video
camera. Power, control signals, video signals, audio
signals etc. can be carried over a single link.
Note
When there is dust or other contamination on the
connection face for the optical fiber cable, transmission
errors will occur. Be sure to protect the connector with the
supplied cover when not in use.
1
HDCU connector
2
CAMERA/HDTX connector
3
AC IN connector
1
CAM POWER indicator
2
HDCU/HDFX connector
1
CAMERA connector
