6
Connection example (IP connection)
Connection example (coax connection)
a) Set the signal transfer rate according to the connected camera using the following menu in the HDCU3100/HDCU3170.
SYSTEM CONFIG
t
<CAMERA I/F> (page 21)
b) Signal transfer up to a maximum of 2 km is possible. However, the actual transfer distance may vary depending on the system configuration of the cameras
and the type of optical fiber cables used.
c) HDC2000 series (HDC2000/2580/2500/2400/1700) support optical fiber connection.
d) Signal transfer up to a maximum of 1.8 km is possible. However, the actual transfer distance may vary depending on the system configuration of the
cameras and the type of triax cables used.
e) Install the HKCU-SFP30 ST-2110 Interface Kit.
f) Connect to the LAN-1 and LAN-2 connectors of the HKCU-SFP30 ST-2110 Interface Kit.
g) Connect to the LAN-COM connector of the HDCU3100/HDCU3170.
h) To support SNMP monitoring, install HZCU-SNMP50 SNMP Agent Software (option).
i) To support Ember+ control, install HZCU-CNFG50 Config Control Software (option).
HDCU3100/HDCU3170
a)
e)
MSU-1000 series
Master Setup Unit
HDCU3100/HDCU3170
a)
e)
Optical fiber cable
Triax cable
LAN cable
or
or
f)
f)
g)
f)
f)
g)
Target cameras
• Optical fiber connection
b)
HDC3500, HDC3100, HDC2000 series
c)
, HSC300RF/100RF
• Triax cable connection
d)
HDC3170
Audio Mixer
Multi Viewer
Video Server
PTP Master ×2
IP Live System
Manager ×2
IP Intercom
IP Tally System
SNMP Manager
h)
Ember+ software
i)
IP switch ×2
10G/25G
IP switch
1G
IP switch
10G/25G
INCOM
INTERCOM 1
PROD
LEVEL
REAR
FRONT
MIC
ON
OFF
ENG
INCOM
INTERCOM 2
PROD
LEVEL
REAR
FRONT
MIC
ON
OFF
ENG
a) A dedicated power supply (external DC power source) for the camera is required. Power is not supplied from the camera control unit.
b) Configure the following menu settings.
• Set SYSTEM CONFIG
t
<CAMERA I/F>
t
CABLE TYPE to COAX.
• Set SYSTEM CONFIG
t
<VIDEO I/O>
t
SDI-I/O 3
t
SIGNAL to HD TRUNK.
• Set SYSTEM CONFIG
t
<VIDEO I/O>
t
SDI-I/O 4
t
SIGNAL to HD PROMPTER.
HDCU3100
b)
HDC2500 only
BNC cable (HD SDI)
BNC cable (HD SDI)
DC power supply
a)
SDI 2
SDI 1
SDI I/O 3
SDI I/O 4
