13
Status Display
The CCU system status can be monitored using a video
monitor connected to the CHARACTER, SDI OUT 3, or SDI
OUT 4 connector.
To use the SDI OUT 3 or SDI OUT 4 connector, set SYSTEM
CONFIG
t
<OUTPUT FORMAT1>
t
SDI-OUT3 or SDI-
OUT4
t
MONITOR in the setup menu to M.
For information on monitoring and changing settings, see
“Menu Settings” (page 15).
Displaying the Status Screen
The menu screen is controlled using the knob and levers in the
MENU control block on the front panel.
To display the status screen
Set the DISP/MENU lever to the DISP position. The most
recently viewed status screen page is displayed. (When first
powered on, the camera settings page is displayed.) Turning
the CONTROL knob changes the displayed page.
To exit the status screen display
In status screen display mode, set the DISP/MENU lever to
the DISP position.
Status Display Screen
The following information is displayed on the status display
screen.
• System status
• Input/output signal format information of each SDI
connector
• Camera and unit audio status
• Camera and unit intercom status
• Warning display
Camera settings
a
Camera name indication
Displays the name of the connected camera.
b
Lens file name indication
Displays the lens file name.
c
F drop indication
Displayed when an F drop occurs.
d
EX (lens extender) indication
Displayed during use of the lens extender.
e
F-stop value indication
Displays the lens F-stop value (iris value).
f
Camera auto control information area
Top:
Displays the Auto Setup type and execution status.
Bottom:
Displays the execution item.
g
Gain value indication
Displays the video output signal gain setting value (dB).
h
ND filter indication
Displays the currently selected ND filter type.
i
CC filter indication
Displays the currently selected CC filter type.
j
Camera microphone status indication
Displayed when the camera microphone is on.
k
Shutter speed/Clear scan frequency indication
Displays the shutter speed. When ECS is on, displays the
clear scan frequency.
l
Shutter/ECS indication
Displays the on/off state of the shutter/ECS.
• Items that are turned off using the <DISPLAY> page
settings of the VIDEO/MONITOR menu are not displayed.
• A “-” mark is displayed for each item when a camera is not
connected.
Note
DISP/MENU lever
CONTROL knob
Notes
HDC3500 HJ22eX7.6B *EX F:4.7
6dB ND:1 CC:A TALK 1/2000 OFF
7
8
9
0
qa
qs
1
2
3 4
5
6
