Sony HDC3100, Руководство по эксплуатации

Страница: 47 / 56

47
FILE
Page title
Page No. Item Settings Description
<OPERATOR FILE>
F01
READ (USB t CAM) Execute via ENTER. Reads the operator file from a USB drive.
WRITE (CAM t USB) Execute via ENTER. Writes the current settings of the operator file items
to a USB drive.
PRESET Execute via ENTER. Sets the operator file items to the preset values in
internal memory.
STORE PRESET FILE Execute via ENTER. Stores the current settings of the operator file items
in the operator file in internal memory.
<SCENE FILE>
F02
1 Stores and reads scene files (paint data):
When storing a file in camera memory, specify the
number before executing STORE.
When reading, only specify the number.
2
3
4
5
STORE Execute via ENTER.
01 01
to 32
STANDARD Execute via ENTER. Reads the standard paint data.
READ (USB
t
CAM) Execute via ENTER. Loads 32 scene files from a USB drive to internal
memory.
WRITE (CAM t USB) Execute via ENTER. Writes 32 scene files in the camera’s memory to a
USB drive.
FILE ID Max.14 characters Enters a comment for the scene files to be written to
a USB drive.
See “To specify a character string” on page 23.
CAM CODE Camera code Display only
DATE Date Display only
DISSOLVE OFF , ON Switching a scene file seamlessly.
SPEED 0.2 to 2.8 (0.2 steps), 3 to 10
(1 steps),
0.2
<REFERENCE>
F03
STORE FILE Execute via ENTER. Stores the current settings of the reference file items
in the reference file in internal memory.
STANDARD Execute via ENTER. Reads the standard values in the reference file in
internal memory.
ALL PRESET Execute via ENTER. Resumes the factory-preset reference file.
READ (USB t CAM) Execute via ENTER. Loads a reference file from a USB drive.
WRITE (CAM t USB) Execute via ENTER. Writes the current settings of the reference file items
as a reference file to a USB drive.
FILE ID Max.14 characters Enters a comment for the reference file to be written
to a USB drive.
See “To specify a character string” on page 23.
CAM CODE Camera code Display only
DATE Date Display only
<LENS FILE>
F04
STORE FILE Execute via ENTER. The center marker is not included.
No. 1 to 17, 1 1 to 16 : When using a non-serial lens (When using a
large lens, this setting depends on the internal
setting of the lens.)
17 : When using a serial lens
NAME Changeable only when using a non-serial lens.
F NO F1.0 to F3.4, F1.7 Changeable only when using a non-serial lens.
CENTER MARKER Sets and stores the center marker position:
H POS : Increasing the value moves the position to
the right.
V POS : Increasing the value moves the position
downwards.
H POS –20 to +20, 0
V POS –20 to +20, 0
STORE Execute via ENTER.
<OHB FILE>
F05
STORE FILE Execute via ENTER. Stores the offset values of items specific to the
CCD. (No repeated store operation is necessary
even if the CCD is reattached)