Sony HD-X1, Руководство по обслуживанию

Страница: 84 / 118

84
HCD-X1
MIB01 BOARD IC601 MB89538APFM-G-663-E1 (HDMI CONTROLLER)
Pin No. Pin Name I/O Description
1, 2
P46, P47 - Not used
3 to 10
AN0 to AN7 - Not used
11
AVCC - Power supply terminal (+5.2V) (for internal A/D converer)
12
AVR I Reference voltage (+5.2V) input terminal (for internal A/D converer)
13
AVSS - Ground terminal (for internal A/D converer)
14
XSMCS I Chip select signal input from the servo DSP
15
INT11 - Not used
16 XTXINT
I Interrupt status input from the HDMI panellink cinema transmitter
17
INT13 - Not used
18
P64 - Not used
19 XRST I System reset signal input from the servo DSP "L": reset
20, 21
MOD0, MOD1 I Setting terminal for memory access mode Fixed at "L" in this set
22
X0 I System clock input terminal (8 MHz)
23
X1 O System clock output terminal (8 MHz)
24
VSS - Ground terminal
25
P27 - Not used
26 SDA1 I/O Two-way data bus with the progressive scan converter and pixel resolution converter
27
SCL1 O
Serial data transfer clock signal output to the progressive scan converter and pixel resolution
converter
28 P-CON - Not used
29, 30 P22, P23 - Not used
31
SDA0 I/O Two-way data bus with the HDMI panellink cinema transmitter
32 SCL0 O Serial data transfer clock signal output to the HDMI panellink cinema transmitter
33, 34
N.C - Not used
35
XTXRST
O
System reset signal output to the HDMI panellink cinema transmitter "L": reset
36
XIPRST
O
System reset signal output to the progressive scan converter "L": reset
37 XSCRST O System reset signal output to the pixel resolution converter "L": reset
38, 39
N.C - Not used
40
DL-MODE - Not used
41 to 43
N.C - Not used
44, 45
TYPE0, TYPE1 - Not used
46 to 49
N.C - Not used
50
SMSCK - Not used
51
SMSDI I Serial data transfer clock signal input from the servo DSP
52 SMSDO O Serial data output to the servo DSP
53 SI1 I Serial data input from the servo DSP
54
PTO2 - Not used
55
PWC - Not used
56
VCC - Power supply terminal (+5.2V)
57
WTO - Not used
58
PTO1 - Not used
59
EC - Not used
60
SCK2 - Not used
61
SDA I/O Two-way data bus terminal for the HDMI OUT jack
62 SCL O Serial data transfer clock signal output terminal for the HDMI OUT jack
63 UCK2 - Not used
64 UD2 - Not used