Sony HCD-WZ5 Скачать руководство пользователя страница 14

Страница: 14 / 46

HCD-WZ5

[Cold Reset]

• The cold reset clears all data including preset data stored in the

RAM to initial conditions. Execute this mode when returning the
set to the customer.

Procedure:

1. Press three buttons

, EQ EDIT and

simultaneously.

2. The liquid crystal display does not display any message and the

set is reset.

[MD/VIDEO Function Selection Mode]

• This mode is used to select the function of MD or VIDEO.

Procedure:

1. Press the

button to turn the set on.

2. Press the MD(VIDEO) and

buttons simultaneously.

3. The function will change from MD to VIDEO, and "VIDEO" is

displayed.

4. To change change back to MD , repeat the same procedure.

[AM Channel Step 9 kHz/10kHz Selection Mode]

• Either the 9 kHz step or 10 kHz step can be selected for the AM

channel step.

Procedure:

1. Set the function to AM.
2. Turn off the main power.
3. While depressing the

button, press the

button to turn

on the main power.

4. The channel step is changed over.
* For E model only

[CD Ship Mode (without Cold Reset)]

• This mode moves the optical pick-up to the position durable to

vibration. Use this mode when returning the set to the customer
after repair.

Procedure:

1. Press the

button to turn the set on.

2. Set the function to CD.
3. Press the

button and the

(Control lever) button

simultaneously.

4. After the "STANDBY" display blinks six times, the message

"LOCK" is displayed on the liquid crystal display, and the CD
ship mode is set.

[CD Ship Mode (without Cold Reset)]

• This mode is used to perform the CD Ship Mode with Cold Reset.

Procedure:

1. Press the

button to turn the set on.

2. Set the function to CD.
3. Press three buttons

START (REC PAUSE) and

– simultaneously.

4. After the "STANDBY" display blinks six times, the message

"LOCK" is displayed on the liquid crystal display, and the CD
ship mode is set.

[Disc Tray Lock]

• The disc tray lock function for the antitheft of an demonstration

disc in the store is equipped.

Setting Procedure :

1. Press the

button to turn the set on.

2. Set the function to CD.
3. Press two buttons of

and

simultaneously for five seconds.

4. The message “LOCKED” is displayed and the tray is locked.

Releasing Procedure :

1. Press two buttons of

and

simultaneously for five seconds

again.

2. The message “UNLOCKED” is displayed and the tray is

unlocked.

Note :When “LOCKED” is displayed, the tray lock is not released

by turning power on/off with the

button.

[GC Test Mode]

• This mode is used to check the software version, key board, VACS

level, liquid crystal display and LEDs.

Procedure:

1. Press three buttons

START (REC PAUSE) and

TUNER/BAND simultaneously.

2. Segments of the liquid crystal display and LEDs are all turned

on.

3. To enter the software version display mode, press the

–

button. The model name and destination are displayed.

4. Each time the

– button is pressed, the display changes

in the following order. MC, GC, CD, CDD, CDMA, CDMB,
BDA, BDB, ST, TA, TM, TC and MD. Each time the +

M >

button is pressed, the contents of the version display change.

5. Press the

button, and the key check mode is activated.

6. In the key check mode, "K 0 V 0" is displayed. Each time a

button is pressed, "K 0" value increases. However, once a button
is pressed, it is no longer taken into account. "V 0" value
increases like 1, 2, 3 ... if rotaing the VOLUME knob clockwise,
or it decreases like 0, 9, 8 ... if rotating couterclockwise.

7. To exit from this mode, press three buttons in the same manner

as step 1, or disconnect the power cord.

• VACS Level Display Mode

Procedure:

1. Press three buttons

START (REC PAUSE) and

TUNER/BAND simultaneously.

2. Press the

button. The VACS level "VACS 0+0" is displayed.

3. To exit from this mode, press three buttons in the same manner

as step 1, or disconnect the power cord.

• Display Check