![background image](http://html.mh-extra.com/html/sony/hcd-vx550/hcd-vx550_service-manual_420909049.webp)
49
7-28.
IC PIN FUNCTION DESCRIPTION
Pin No.
Pin Name
I/O
Description
1
STK-MUTE
O
Power amplifier on/off selection signal output terminal “L”: standby mode, “H”: on
2
POWER
O
Power on/off control signal output for the audio system (+5V) and deck, panel, audio system
(+7V) “L”: standby mode, “H”: power on
3
F-RELAY
O
Relay drive signal output for the speaker protect “H”: relay on
4
R-RELAY
O
Relay drive signal output for the speaker protect “H”: relay on Not used (open)
5
CD-POWER
O
Power on/off control signal output for the CD/video CD section
“L”: standby mode, “H”: power on
6
LINE-MUTE
O
Line muting on/off control signal output terminal “L”: muting on
7
DBFB-H/L
O
DBFB normal/high selection signal output to the M62493FP (IC101)
“L”: DBFB high, “H”: DBFB low
8
BYTE
I
External data bus line byte selection signal input terminal Fixed at “L” in this set
9
CNVSS
—
Ground terminal
10
XC-IN
I
Sub system clock input terminal (32.768 kHz)
11
XC-OUT
O
Sub system clock output terminal (32.768 kHz)
12
RESET
I
System reset signal input from the reset signal generator (IC502) “L”: reset
For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H”
13
X-OUT
O
Main system clock output terminal (16 MHz)
14
VSS
—
Ground terminal
15
X-IN
I
Main system clock input terminal (16 MHz)
16
VCC
—
Power supply terminal (+5V)
17
NMI
I
Non-maskable interrupt input terminal Fixed at “H” in this set
18
WAKE UP
I
Wakeup control signal input from the fluorescent indicator tube driver (IC601) “H” active
19
SCOR
I
Subcode sync (S0+S1) detection signal input terminal Not used (fixed at “L”)
20
RDS-INT
I
Serial data transfer clock signal input terminal Not used (fixed at “L”)
21
RDS-DATA
I
Serial data input terminal Not used (fixed at “L”)
22
AC-CUT
I
AC off detection signal input from the reset signal generator (IC502) “L”: AC cut checked
23
PL-CLK
O
Serial data transfer clock signal output to the pro-logic circuit Not used (open)
24
PL-DATA
O
Serial data output to the pro-logic circuit Not used (open)
25
PL-LAT
O
Serial data latch pulse output to the pro-logic circuit Not used (open)
26
TIMER LED
O
LED drive signal output of the TIMER SELECT indicator (D632) “H”: LED on
I
Protect on/off detection signal input from the speaker protect circuit
“L”: protect on, “H”: protect off
O
Not used (open)
I/O
Communication data reading clock signal input or transfer clock signal output with the CD
mechanism controller (IC502) and fluorescent indicator tube driver (IC601)
I/O
Communication data bus with the CD mechanism controller (IC502) and fluorescent indicator
tube driver (IC601)
O
Not used (open)
I
Subcode Q data input terminal Not used (fixed at “L”)
33
SQ-CLK
O
Subcode Q data reading clock signal output terminal Not used (open)
34
SW MODE
O
Not used (open)
35
CD-DATA
O
Serial data output terminal Not used (open)
36
RY-SW
I
Connection detect signal input of the headphone jack (J701)
“L”: no connected, “H”: headphone connected
37
CD-CLK
O
Serial data transfer clock signal output terminal Not used (open)
38
493-LATCH
O
Serial data latch pulse output to the M62493FP (IC101)
39
STBY LED
O
LED drive signal output of the I/
u
indicator (D754) “H”: LED on (standby mode)
MAIN BOARD IC105 M30622MA-A09FP (SYSTEM CONTROLLER)
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299