Sony HCD-U1BT - Receiver Component For Micro Hi-fi Systems, Руководство по эксплуатации

Страница: 15 / 32

15
GB
Basic Oper
ations
CMT-U1.GB.2-683-463-11(2)
To change the play mode
Press PLAY MODE

repeatedly while the
USB device is stopped. You can select normal
play (“ ” for all files in the folder on the
digital music player), shuffle play (“SHUF” or “
SHUF”), or program play (“PGM”).
Notes on the USB device
• With some connected USB devices, after an operation
is performed, there may be a delay before it is
performed by this system.
• This system does not necessarily support all the
functions provided in a connected USB device.
• The playback order for the system may differ from the
playback order of the connected USB device.
• Always press
 
and make sure that “Device Stop”
appears before removing the USB device. Removing
the USB device while “Device Stop” is not displayed
may corrupt the data on it or damage the USB device
itself.
• Do not save other types of files or unnecessary folders
on an USB device that has audio files.
• Folders that have no audio files are skipped.
• Files are played back in the order that they are
transferred to the USB device.
• The maximum numbers of folders and files that can be
contained on a single USB device are as follows:
– Digital music player: 65,535 groups (maximum 999
tracks per group)/65,535 tracks
– USB storage media: 512 folders (including the root
folder, maximum 999 files per folder, maximum 255
folders per folder)/65,535 files
The maximum number of files and folders may vary
depending on the file and folder structure.
• The audio formats that you can listen to with this
system are as follows:
– MP3: file extension “.mp3”
– Windows Media file: file extension “.wma”
– AAC: file extension “.m4a”
Note that even when file names have the above file
extensions, if the actual file differs, the system may
produce noise or may malfunction.
• Compatibility with all encoding/writing softwares,
recording devices, and recording media cannot be
guaranteed. Incompatible USB device may produce
noise or interrupted audio or may not play at all.
Using optional audio
components
1
Connect additional audio component
to the AUDIO IN jack

on the unit
using an audio analog cord (not
supplied).
2
Turn down the volume.
Press VOLUME –

.
3
Select the AUDIO IN function.
Press AUDIO IN

on the unit.
4
Start playing the connected
component.
5
Adjust the volume.
Press /–

.