Sony HCD-U1BT - Receiver Component For Micro Hi-fi Systems, Руководство по эксплуатации

Страница: 14 / 32

14
GB
CMT-U1.GB.2-683-463-11(2)
Listening to music of an
USB device
You can connect an optional USB device
(Digital music player or USB storage media) to
the (USB) port

on the unit and listen to
music stored in the USB device. See “Playable
USB devices” (page 28) for a list of USB devices
that can be connected to this system.
The audio formats that can be played back
by this system are as follows: ATRAC/MP3
1)
/
WMA 1) /AAC 1)2)
1) Files with copyright protection (Digital Rights
Management) cannot be played by this system.
2) AAC files transferred to a digital music player using
SonicStage CP cannot be played by this system.
1
Select the USB function.
Press USB

.
2
Connect an optional USB device
(Digital music player or USB storage
media) to the (USB) port
 as
shown below.
USB device (Digital music player or
USB storage media)
When USB cable connection is necessary,
connect the USB cable supplied with the
USB device to be connected.
See the operation manual supplied with the
USB device to be connected for details on
the operation method.
When the USB device is connected, the
display changes as follows:
“Detect”

“Connecting”

“ATRAC
AD” or “STORAGE DRIVE”
Note
It may take about 10 seconds before “Detect” appears
depending on the type of USB device connected.
3
Start playback.
Press

(or USB

on the unit)

.
4
Adjust the volume.
Press /–

.
Other operation
To Press
Pause playback

(or USB

on the
unit)

. To resume play,
press the button again.
Stop playback
 
.
Select a folder
+/– (or

/

on the
unit)

.
Select a file

/
 
.
Select a folder
and file using the
buttons on the
unit*
SEARCH

. Press

/


to select the desired
folder, then press ENTER

. Press

/
 
to select
the desired file, then press
ENTER

.
Find a point in
a file
Hold down

/


during playback, and
release the button at the
desired point.
Select Repeat
Play
REPEAT

repeatedly
until “REP” or “REP1”
appears.
Remove the USB
device
Hold down
 
until
“Device Stop” appears, then
remove the USB device.
* Artist searches and group searches are possible for
some USB device types.