59
GB
Tr
ou
bl
esh
oot
in
g
,
Are the + and – speaker cords short-circuited?
,
Are you using only the supplied speakers?
,
Is anything blocking the ventilation holes of the
system?
,
The specified station may have temporarily stopped
broadcasting.
,
Place the speakers as symmetrically as possible.
,
Connect only the supplied speakers.
,
Move the system away from any sources of noise.
,
Connect the system to a different wall outlet.
,
Install a noise filter (not supplied) to the power cord.
,
Remove any obstacles between the remote and the
remote sensor on the unit, and position the unit away
from fluorescent lights.
,
Point the remote at the sensor on the unit.
,
Move the remote closer to the system.
,
The batteries may be run down. Replace the batteries
with new ones.
,
The STANDBY indicator may not turn off
immediately after unplugging the power cord. The
indicator will turn off after about 40 seconds. This is
not a malfunction.
,
Wipe the disc clean, and replace it.
,
Move the system to a location away from vibration
(for example, to the top of a stable stand).
,
Move the speakers away from the system, or place
them on separate stands. At high volume, speaker
vibration may cause the sound to skip.
,
Return to Normal Play by pressing PLAY MODE
repeatedly until both “PGM” and “SHUF” disappear.
,
The following discs can increase the time it takes to
start playback:
• a disc recorded with a complicated tree structure.
• a disc recorded in multisession mode.
• a disc that has not been finalized (a disc to which
data can be added).
• a disc that has many folders.
,
Connect the antenna properly.
,
Find a location and an orientation that provide good
reception, and then set up the antenna again.
,
Keep the antennas away from the speaker cords and
the power cord to avoid picking up noise.
,
Turn off nearby electrical equipment.
,
Check all antenna connections, then perform the
DAB Initial Scan procedure (see “Performing a DAB
Initial Scan manually” (page 32)).
,
The current DAB/DAB+ service may not be
available. Press +/– to select a different service.
,
If you have moved to another area, some services/
frequencies may have changed and you may not be
able to tune into your usual broadcast. Perform the
DAB Initial Scan procedure to re-register the
contents of broadcasts. (Performing this procedure
clears all previously stored presets.)
,
Make sure the iPod/iPhone is connected securely.
,
Make sure the iPod/iPhone is playing music.
,
Adjust the volume.
,
Make sure the iPod/iPhone is connected securely.
,
Turn down the volume.
,
Set the “EQ” setting of the iPod/iPhone to “Off” or
“Flat.”
There is no sound.
Sound comes from only one channel, or the
left and right volumes are not balanced.
There is a severe hum or noise.
The remote does not function.
The STANDBY indicator remains lit after
unplugging the power cord.
CD/MP3 player
The sound skips, or the disc will not play.
Playback does not start from the first track.
Starting playback takes more time than usual.
Tuner
There is a severe hum or noise, or stations
cannot be received (“TUNED” or “ST” flashes
on the display).
The DAB/DAB+ radio station is not received
properly (CMT-MX750Ni only).
iPod/iPhone
There is no sound.
The sound is distorted.
Содержание HCD-MX700Ni
Страница 77: ...77GB Precautions Specifications ...
Страница 78: ...78GB ...
Страница 79: ...79GB Precautions Specifications ...
Страница 80: ... 2010 Sony Corporation Printed in China 4 199 695 14 1 ...