background image

24

DOLBY NR

VOLUME

PROGRAM

OFF

1

Place CDs and close the front cover.

2

Press FUNCTION repeatedly until
“CD” appears in the display.

3

Press PLAY MODE repeatedly until
“PROGRAM” appears in the
display.

4

Press DISC SKIP (or D.SKIP on the
remote) to select a CD.

5

Turn the jog dial until the desired
track appears in the display.

6

Press PLAY MODE once.

The track is programmed. First “STEP”
and the programmed playing order
appear, then the total playing time
appears.

7

Repeat steps 4 through 6 to program
additional tracks.

Skip step 4 to select tracks from the same
disc.

8

Press 

HX

.

All the tracks play in the order you
selected.

Disc number

Total playing time

Track number

To cancel Program Play

Press PLAY MODE repeatedly until
“PROGRAM,” “ALL DISCS SHUFFLE,” or
“1 DISC SHUFFLE” disappears from the
display.

To

Check the program

Clear the last selected
track

Clear a specific track

Add a track to the
program

Clear the entire
program

Tips

• The program you created remains in the CD

player’s memory even after it has been played.
Press 

HX

 to play the same program again.

• If “--.--” appears instead of the total playing time

while programming, this means:
– you have programmed a track numbered over

20, or

– the total playing time has exceeded 100 minutes.

Programming CD tracks
(continued)

Press

CHECK on the remote
repeatedly. After the
last track, “CHECK
END” appears.

CLEAR on the remote
in stop mode.

CHECK on the remote
repeatedly until the
number of the track to
be cleared lights up,
then press CLEAR.

1 Press DISC SKIP (or

D.SKIP on the remote)
to select a CD.

2 Turn the jog dial to

select a track.

3 Press PLAY MODE.

x

 once in stop mode or

twice while playing.

DOLBY NR

VOLUME

PROGRAM

OFF

The last
programmed track Total playing time

Содержание HCD-LX90AV - Compact Hi-fi Stereo System





























































Отзывы: