– 14 –
• Display when ended abnormally
When the tape deck is abnormal:
The state when ended abnormally is displayed.
The contents of display are the same as that during aging.
When the CD player is abnormal:
A message indicating that errors such as “CD MEC ERR” have occurred.
Check the error contents in the following error history display mode.
Error History Display Mode
Mode which enables the history of error occurring in the CD player to be checked.
Execute this mode after ending the aging mode.
Procedure:
1. Press the
1
/
u
button to turn the set ON.
2. Press the three buttons
t
/CLOCK SET , ENTER , and CD SYNCHRO simultaneously.
3. A message such as “EMC@@EDC**” is displayed.
@@ : Number of mechanical errors (Up to three past errors)
**
: Number of errors (NO DISC ERROR) which occurs after chucking (Up to three past errors)
4. When checking the history of mechanical errors, press the PLAY MODE button. When checking errors after chucking, press the
REPEAT button to switch the display.
5. Press the
1
/
u
button to end and turn the set OFF.
6. To erase the error history, perform COLD reset.
(Press the three buttons
t
/CLOCK SET , ENTER , and DISC 1 simultaneously.
• Viewing the mechanical error history display
(Switch the history by pressing the PLAY MODE button.)
Display
E@@M#*****
@@ : Error number. 00 is the newest.
#
: Operating state of table
0
: Currently in the INITIAL mode
7
: Currently rotating to the right
8
: Currently rotating to the left
A
: Currently chucking down
B
: Currently chucking up
*
: Invalid
Содержание HCD-DR4
Страница 2: ... 2 ...
Страница 36: ...HCD DR4 DR5 DR6 DR440 W300 W5000 XB500 53 54 7 11 SCHEMATIC DIAGRAM DECK SECTION Page 49 ...
Страница 52: ...HCD DR4 DR5 DR6 DR440 W300 W5000 XB500 85 86 7 27 SCHEMATIC DIAGRAM CD MOTOR SECTION Page 48 ...
Страница 54: ...HCD DR4 DR5 DR6 DR440 W300 W5000 XB500 89 90 7 29 SCHEMATIC DIAGRAM JACK SECTION Page 57 65 Page 52 ...