134
Others
Symptom
Cause and/or Corrective Actions
• The input selector on the VCR is not set correctly.
c
Set the selector correctly, and check the connection between
the VCR and your camcorder. (p. 91)
• The camcorder is connected to DV equipment other than of
Sony using the i.LINK cable (DV connecting cable).
c
Keep the connection, and follow the procedure on
page 89.
• Setting programme on a blank portion of the tape is attempted.
c
Set the programme again on a recorded portion. (p. 101)
• The synchronization of your camcorder and the VCR is not
adjusted.
c
Adjust the synchronization of the VCR. (p. 99)
• Your camcorder was connected to your computer with the USB
cable before installing the USB driver, so the driver was not
recognised by the computer.
c
Uninstall the unrecognised driver, and then reinstall the
driver. (p. 113)
• The USB driver is not installed correctly.
c
Uninstall the unrecognised driver, and then reinstall the
driver. (p. 113)
• Your computer's operating system is Windows 98 or earlier.
• The USB cable was not connected before starting up the
application software.
c
Connect the USB cable before starting up the application
software. (p. 116)
• COMMANDER is set to OFF in the menu settings.
c
Set it to ON. (p. 125)
• Something is blocking the infrared rays.
c
Remove the obstacle.
• The batteries are inserted in the battery holder with the + –
polarities incorrectly matching the + – marks.
c
Insert the batteries with the correct polarity. (p. 168)
• The batteries are dead.
c
Insert new ones. (p. 168)
• Disconnect the power code of the AC power adaptor or remove
the battery pack, then reconnect it after about 1 minute. Turn
the power on (p. 15, 19). If the functions still do not work, press
RESET using a sharp-pointed object. (If you press RESET, all
the settings including the date and time return to the default.)
(p. 166)
• Moisture condensation has occurred.
c
Remove the cassette and leave your camcorder for at least 1
hour to acclimatize. (p. 154)
• Some troubles have occurred in your camcorder.
c
Remove the cassette and insert it again, then operate your
camcorder.
The Remote Commander supplied
with your camcor der does not work.
The melody or beep sounds for
5 seconds.
Types of trouble and their solutions
No function works though the power
is on.
Digital program editing does not
function.
You cannot install the USB driver .
USB Streaming function does not
work.
