DCR-SR58E/SR68/SR68E/SR78E/SR88/SR88E_L2
3-1E
3. ASSEMBLY
Assembly-1:
How to distinguish the side of Optical Filter
Block facing to Lens Device
• IR cut coating surface
The red coating is reflected.
• The other surface
The red coating is
not reflected.
• Side view
The red belt
is seen.
Lens Device side
Lens Device side
Hold it with tweezers or the like.
Optical Filter
Block
[IR Cut Coated Side]
[The Other Side]
The one side of the Optical Filter Block has treated
with IR cut coating.
Mount the Optical Filter Block facing the IR cut
coated side to the lens device.
Distinguish the IR cut coated side from the other by
applying the fluorescent light to
the Optical Filter Block in the dark place
(cut off the outside light).
Assembly-2:
Precaution Mounting method of D901
(LED video light)
Diode (NSPL500DS)
Precaution the polarity.
5.7mm
11.5mm
Bend
Cut
DA-049 Board
Assembly-3:
The Method of attachment of FP-1239
Flexible Board
1
Fold dotted line parts of the FP-1239 flexible board
as shown in figure.
Unite
corners.
Valley fold
Valley fold
Mountain fold
Mountain fold
Adhesive part
Adhesive part
Adhesive part
Adhesive
tape
FP-1239
Flexible
Board
2
Put FP-1239 Flexible Board on the Hinge Assy
as shown in figure.
3
Install the flexible clamp in the hinge assy
as shown in figure.
4
Install the hinge cover (M) and magnet.
Hinge Assy
Adhesive Part
Flexible clamp
Hinge Cover (M)
Put the marking side
together on the position
of figure.
Marking
Magnet
5
Install the hinge cover (C).
6
Roll the FP-1239 flexible board 2 times in
the hinge assy as shown in figure.
Hinge Cover (C)
Claws
2 times
