105
“Memory Stick” operations
Preventing accidental erasure
– Image protection
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert a “Memory Stick” into your camcorder.
(
1
)
Set the POWER switch to MEMORY while pressing the small green button.
Make sure that the LOCK is set to the right (unlock) position.
(
2
)
Press INDEX on your camcorder or the Remote Commander to display the
index.
(
3
)
Press “
-
MARK.” The screen to protect the image appears.
(
4
)
Press the image you want to protect. The “
-
” appears on the protected
image.
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image protection in step 4. The “
-
” disappears.
Note
Formatting erases all information on the “Memory Stick”, including the protected
image data. Check the contents of the “Memory Stick” before formatting.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot carry out image protection.
2
INDEX
3,4
1
2
3
4
5
6
EXIT
RET
-
MARK
1 / 40
1
2
3
4
5
6
EXIT
DEL
MARK
-
MARK
T
t
-
2 / 40
T
t
-
MARK
1
LOCK
POWER
VTR
MEMORY
CAMERA
OFF
LOCK
