Troubleshooting
78
The title cannot be deleted.
c
Set the write-protect tab to REC. (p. 84)
Title search does not work.
c
Enter a title if there is no title on the tape. (p. 52)
c
Use a cassette with Cassette Memory. (p. 83)
c
Set [CM SEARCH] to [ON] in the
(CM SET) menu. (p. 54)
• There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
Digital program editing does not
function.
c
Set the input selector on the VCR correctly, then check the connection
between your camcorder and the VCR. (p. 62)
c
When your camcorder is connected to a DV device that is not a Sony
product via an i.LINK cable, select [IR] in step 9 of “Step 1: Preparing
your camcorder and VCR for operation” (p. 64).
c
Adjust the synchronization of the VCR. (p. 66)
c
Enter a correct [IR SETUP] code. (p. 66)
c
Select the mode used to cancel recording pause again. (p. 65)
c
Set your camcorder and the VCR more than 30 cm (12 in.) apart. (p. 65)
• The program may not be set to a blank section on the tape.
The VCR is not responding properly
during Digital program editing when
it is connected via an i.LINK cable.
• While connecting via an i.LINK cable, select [IR] in step 9 of “Step 1:
Preparing your camcorder and VCR for operation” (p. 64).
The pictures appear distorted or dark. • A/V connecting cables are connected to both your camcorder and the
Handycam Station.
c
Disconnect one of the A/V connecting cables.
Symptom
Cause and/or Corrective Actions
