Sony H.ear go SRS-HG1, Руководство пользователя, Страница: 29 / 265

Help Guide
Personal Audio System
h.ear go (SRS-HG1)
Connecting to a Wi-Fi network using an iPhone/iPod touch
Note that the speaker should be initialized to the factory default for this connection. All BLUETOOTH device registration (pairing)
information is deleted. To use the BLUETOOTH connection after that, delete all pairing information on the iPhone/iPod touch, and
then set pairing again.
If the iPhone/iPod touch is iOS 8 or later, the speaker can be connected to the same Wi-Fi network. The Wi-Fi network settings of
the speaker are made by the iPhone/iPod touch.
Do the following before starting.
Place the speaker near the wireless router and the iPhone/iPod touch.
Make sure that the iPhone/iPod touch is updated to iOS 8 or later.
Connect an iPhone/iPod touch to the wireless router.
Connect it to 2.4 GHz band (11b, 11g, and 11n) or 5 GHz band (11a and 11n). The speaker does not support IEEE
802.11ac.
1
With the speaker turned on, press and hold the – (volume) button and the (power)/ PAIRING button
at the same time for more than 4 seconds to initialize the settings of the speaker.
The (power) indicator flashes quickly in green for two seconds. The settings of the speaker return to their factory defaults,
and network information and all BLUETOOTH device registration (pairing) information are deleted. Then, the speaker enters
the start-up mode automatically. It takes about 15 to 30 seconds to turn on the speaker. When the (power) indicator lights
2
13