20
GB
Other operations
Notes
• The Daily Timer setting or the Timer Recording
setting overlaps with part or all of another timer
setting.
• If you use the Timer Recording and the Sleep Timer
at the same time, the Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the recording starts (about 15 seconds
before the preset time).
• If the system is on about 15 seconds before the preset
time, the Timer Recording will not be activated.
• The volume is reduced to minimum during
recording.
• Note that if the Timer Recording is set at the same
time as the Daily Timer sound source is set to tape,
the Timer Recording sound may be recorded onto the
tape.
• When the Timer Recording is set to “OFF”,
“SELECT” does not appear. However, “SELECT”
does not appear when the Daily Timer is set to “ON”.
The clock display can be turned off to minimize
the amount of power consumed during standby
(Power Saving Mode).
Press DISPLAY on the remote repeatedly
while the system is off until the clock
display disappears.
To cancel Power Saving Mode
Press DISPLAY on the remote while the system
is off. Each time you press the button, the
display switches as follows:
Clock display*
y
No display (Power Saving
Mode)
* The clock is displayed only if you set the clock.
Tips
• The
?/1
indicator lights up even in the Power
Saving Mode.
• The timer continues to operate in Power Saving
Mode.
Note
You cannot perform the following operations in Power
Saving Mode.
– setting the clock
– turning on the system by pressing the function
buttons
– switching the MD (VIDEO) function
– switching the CD power on or off using the CD
power manage function
To
Do this
Cancel the timer/
activate the timer/
check the setting
1
Press CLOCK/TIMER
SELECT.
2
Press
./>
repeatedly
until “SELECT” appears,
then press ENTER.
3
Press
./>
repeatedly
until “REC”, “ON” or “OFF”
appears, then press ENTER.
Change the setting
Start over from step 1.
Cancel both Daily
Timer and Timer
Recording
1
Press CLOCK/TIMER
SELECT.
2
Press
./>
repeatedly
until “OFF” appears, then
press ENTER.
Display
Turning off the display
— Power Saving Mode