Sony Glasstron PLM-S700E, Руководство по эксплуатации

Страница: 22 / 100

22
-GB
Screen
ON / OFF
POWER / POWER SAVING
PUSH DISPLAY
PUSH DISPLAY
Turning on the Glasstron
After you complete all of the connections and put on the Glasstron properly, turn on both the
Glasstron and the connected equipment, and follow the procedures below.
1
Checking the display unit position
n
This page
2
Checking the screen position alignment
n
Pages 24
3
Setting a password
n
Page 27
If you do not want to use a password, you have to set the Glasstron to operate without
using a password in “Setting the password.”
Checking the display unit position
Every time you turn on the Glasstron, the adjustment screen appears to help you adjust the
display unit properly. Adjust the display unit following the procedure below.
1
Turn on the Glasstron sliding the POWER switch.
The POWER/POWER SAVING lamp
lights up green.
2
Turn the PUSH DISPLAY jog dial to select the desired language,
then press the jog dial.
3
Read the WARNING and press the jog dial.
DISPLAY LANGUAGE
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
NEDERLANDS
ESPAÑOL
EXEC SEL
DISPLAY LANGUAGE
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
NEDERLANDS
ESPAÑOL
EXEC SEL
FOR YOUR SAFETY AND TO
PREVENT EYE OR OTHER
INJURY, READ AND FOLLOW
ALL INSTRUCTIONS IN THE
USER’S MANUAL.
CHECK
WARNING