Sony GDM-1962B, Руководство по установке

Страница: 3 / 8

READ THIS BEFORE INSTALLING THE UNIT:
Please follow these simple instructions, to assure a trouble free monitor
installation:
Your Sun/Sony GDM-16/1962B monitor like many high-end monitors, requires a
special cable to attach to your computer system. This cable is called a
13W3
type cable.
One such cable is usually supplied with your monitor and has a male 13W3
connector on the end which is intended to connect to the 13W3 female
connector, located in the back of the Sun/Sony GDM-16/1962B unit. Below
illustration displays both female (back of the monitor) and male (end of the cable)
13W3 connections.
If your are using the monitor on a PC system:
This monitor requires a special board to run on a PC system. The video card
supplied must have Jumper for Sync on Green (or Composite sync) in “ON”
position. Please make sure that the “Sync-On-Green” Jumper (Usually
identifiable by a
Red Colored Plastic Jumper on the video card) is in Engaged
position, as shown in figure 2, below.
Figure 2 – Red
Jumper
Engaged
Figure 1 – Red
Jumper
Removed
Figure A - Female 13W3
connection on monitor's
back.
Figure B - Male 13W3
connection on the cable's
end.
Replacement video cards for this monitor can be obtained from: mirage-mmc.com