2. Connect gimbal to PC
1
Before motor parameter adjustment, please double check the gimbal is properly balanced.
If it is not balanced, refer to
Startup Guide
or
Help Guide
and try the balance adjustment again.
2
Control cable needs to be disconnected during motor parameter adjustment. With the power
source of Airpeak turned off, disconnect one side of the control cable as shown in the image below.
Airpeak gimbal setting guide
I
Manual adjustment of motor parameters
4
Control cable
Note:
Pull out this
lock while
pinching
the top and
bottom.
3
Turn the aircraft on.
4
Turn the camera on to avoid a position change of the focus unit in the lens.
5
Connect your PC and Gremsy gimbal with supplied microUSB cable.
2
5
