Sony FWD-50PX3 - 50" Plasma Panel, Руководство по обслуживанию

Страница: 53 / 135

2-3
FWD-50PX3
Color matrix adjustment
Run the following program sequence in order PC → 1080i
→ 480p → Composite.
1. After input each signal, adjust Sub Offset.
.
Input 16-Gray Pattern.
.
Start the service mode and select White Balance
menu.
.
Change SUB-OFFSET and adjust Brightness of 2/16
gray level into under 0.8cd/m
2
.
(SUB-OFFSET:
±
10)
2. Input Full White Pattern.
3. Setup R-GAIN and R/G/B-OFFSET values of the
WHITE BALANCE menu into the following TABLE
value.
PC 1080i 480p PAL
R Gain 33 34 34 34
G Gain 32 33 33 33
B Gain 31 32 32 32
R Offset 61 61 61 61
G Offset 60 60 60 60
B Offset 63 63 63 63
4. Change G-GAIN and B-GAIN values and adjust color
matrix. (Refer to Sony Color Matrix Spec.)
11000K: x = 276 (
± 15), y = 282 ( ± 15)
9300K: x = 283 ( ± 15), y = 298 ( ± 15)
6500K: x = 313 ( ± 15), y = 329 ( ± 15)
5. Adjust each color temperature 11000K/9300K/6500K
in order repeating steps 3 and 4.
Shipment condition setting
Set up the shipment condition.
1.
Start the on service mode.
(Refer to Section 2-1-1.)
2. After selecting For Test menu, run Init Good.
n
When the setting is completed, the unit becomes ON
state automatically after power ON/OFF.
2-2. White Balance Adjustment
2-2-1. Initialization
Initialize all information stored in EEPROM.
1.
Start the service mode. (Refer to Section 2-1-1.)
2. Select Initialization menu and run FILL 0xFF.
n
When the setting is completed, the unit becomes ON
state automatically after power ON/OFF.
2-2-2. AD Calibration
1. Start the service mode. (Refer to Section 2-1-1.)
2. Select the “Source” menu. Input the “Component”,
“RGB”, “Video” and “YUV” color bar signal respec-
tively, and then perform the AD calibration adjust-
ment.
2-2-3. White Balance
After aging the set about 30 min., adjust color matrix of
each color temperature 11000K/9300K/6500K.
Preparation for adjustment
Required equipment
.
Signal generator (ex: VG-828)
.
Color analyzer (ex: CS1000)
Signals
n
If want to know detail timing. Refer to Sony Timing Spec.
.
PC WXGA (1360
x
768@60 Hz)
.
1080I (Y/Pb/Pr)
.
480P (Y/Pb/Pr)
.
PAL composite
Signal level
700 mV p-p
Signal pattern
.
255-level (75IRE) full white pattern