Sony FWD-50PX3 - 50" Plasma Panel, Руководство по обслуживанию

Страница: 45 / 135

1-15
FWD-50PX3
1-6. Warning on Power Connection
Use a proper power cord for your local power supply.
The United States, Continental Europe UK, Ireland, Australia, Japan
Canada New Zealand
Plug type VM0233 COX-07/636 –
1)
VM1296
Female end VM0089 COX-02/VM0310B VM0303B VM1313
Cord type STV H05VV-F CEE (13) 53rd (O, C) HVCTF
Minimum cord set rating 10 A/125 V 10 A/250 V 10 A/250 V 10A/125V
Safety approval UL/CSA VDE VDE DENAN-HO
1) Use an appropriate rating plug which is applied to local regulations.
1-7. Unleaded Solder
Boards requiring use of unleaded solder are printed with a lead free mark (LF) indicating the solder
contains no lead.
(Caution: Some printed circuit boards may not come printed with the lead free mark due to their
particular size.)
LEAD FREE MARK
Pb
m
.
Be sure to use the unleaded solder for the printed circuit board printed with the lead free mark.
.
The unleaded solder melts at a temperature about 40
d
C higher than the ordinary solder, therefore, it is
recommended to use the soldering iron having a temperature regulator.
.
The ordinary soldering iron can be used but the iron tip has to be applied to the solder joint for a
slightly longer time. The printed pattern (copper foil) may peel away if the heated tip is applied for too
long, so be careful.