2-2
FWD-42PX2
2-1-3. Description of Main Items
1. AD CALIBRATION
PC.CUTOFF:
Sets Cut Off of PC mode.
PC.GAIN:
Sets Gain of PC mode.
DTV.CUTOFF:
Not used
DTV.GAIN:
Not used
CONT.R:
Not used
CONT.G:
Not used
CONT.B:
Not used
BRT.R:
Not used
BRT.G:
Not used
BRT.B:
Not used
2. AUDIO
DELAY:
Sets delay timing of Audio sound.
(0, 5, 15, 20, .....115, 120)
3. WHITE BALANCE
COLOR TEMP:
Sets color temperature (11000, 9300,
6500).
R-GAIN:
Sets Red Gain (contrast).
G-GAIN:
Sets Green Gain (contrast).
B-GAIN:
Sets Blue Gain (contrast).
R-OFFSET:
Sets Red Offset (brightness).
G-OFFSET:
Sets Green Offset (brightness).
B-OFFSET:
Sets Blue Offset (brightness).
SUB-OFFSET:
Not used
SUB-GAIN:
Not used
4. INITIALIZATION
EEPROM INIT.:
Initializes EEPROM to default data.
EXCEPT WB:
Initializes data except white balance.
ONLY WB INIT:
Initializes white balance data only.
ELAPSED TIME: Initializes Operation Time.
SERIAL NO.:
Initializes Serial Number.
MODEL NAME:
Initializes Model Name.
FILL 0xFF:
Initializes EEPROM to 0xFF.
SERIAL MODE:
Sets Serial Mode to communicate with
the set by using RS-232C.
If INT GOODS is run, this is set to
SONY.
SONY: This is for user to control the
set by using RS-232C as
remote controller.
LG:
This is for setting white
balance.
ETC:
This is for developer.
5. FOR TEST
AGING ON/OFF:
Sets Aging Mode on/off.
FAN ON/OFF:
Sets fan on/off.
INIT GOODS:
Initializes whole data for user to be
able to use the set.
6. FOR SONY
S-INIT GOOD:
Initializes whole data except Operation
Time for user to be able to use the set.
FAN FOR TEST:
Sets fan on/off.
n
This mode is used for the check in
service. The fan is stopped under
normal condition. It operates when the
temperature inside of this unit rises.
SELECT RS232C: Not used
7. WB DEFAULT DATA
PC:
Not used
VIDEO:
Not used
DTV:
Not used
DVI:
Not used
COPY WB DATA: Not used
Cable connection
Personal computer
COM port
RS-232C cable
