- 8 -
8
First Time Operation
Switching on the TV and Automatically Tuning
5
After all available channels are captured and stored, the
Programme
Sorting
menu appears automatically on the screen enabling you to change
the order in which the channels appear on the screen.
a)
If you wish to keep the broadcast channels in their tuned order, press
MENU.
b)
If you wish to store the channels in a different order:
1
Press the
V
or
v
button to select the programme number with the
channel (TV Broadcast) you wish to rearrange, then press the
OK
button.
2
Press the
V
or
v
button to select the new programme number position
for your selected channel (TV Broadcast), then press the
OK
button.
3
Repeat steps b)1 and b)2 if you wish to change the order of the other
channels.
6
Because of the earth’s magnetism, the picture might slant. The
Picture
Rotation
menu allows you to correct the picture slant if it is necessary.
a)
If it is not necessary, press the
OK
button.
b)
If it is necessary, press the
V
or
v
button button to correct any slant of
the picture. Finally press the
OK
button to store.
Your TV is now ready for use.
Programme Sorting
Programme:
Select channel
Confirm [
t
]
Select [
–
2
+]
Exit
TVE
TVE2
TV3
04
C33
01
02
03
Programme Sorting
Programme:
Select new position
Confirm [
t
]
Select [
–
2
+]
Exit
01
TVE
02
TVE2
03
TV3
04
C33
03
TV3
Picture Rotation
Confirm [
t
] End
Select [
–
2
+]
[
2
+]
[–
2
]
First Time Operation
7
Switching on the TV and Automatically Tuning
GB
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to:
1) choose the language of the menu screen, 2) choose the country in which you wish to operate the
TV, 3) search for and store all available channels (TV Broadcasts), 4) change the order in which the
channels (TV Broadcasts) appear on the screen and 5) adjust the picture slant.
However, if you need to change any of these settings at a later date, you can do that by selecting the
appropriate option in the
(Set Up) or
(Channel Set Up) menu.
1
Connect the TV plug to the mains socket (220-240V AC, 50Hz). Press the
on/off button on the TV set to turn on the TV.
The first time you switch on the TV, a
Language
menu appears
automatically on the TV screen.
2
Press the
v
or
V
button on the remote control to select the language, then
press the
OK
button to confirm your selection. From now on all the menus
will appear in the selected language.
3
The
Country
menu appears automatically on the TV screen. Press the
V
or
v
button to select the country in which you will operate the TV set, then
press the
OK
button to confirm your selection.
• If the country in which you want to use the TV set does not appear in
the list, select “-” instead of a country.
• In order to avoid wrong teletext characters for Cyrillic languages we
recommend you select Russia as the country if your own country
does not appear in the list.
4
Ensure the aerial is connected as instructed (see page 6), then press the
OK
button to confirm. The TV automatically starts searching and storing all
available broadcast channels for you.
• This procedure could take some minutes. Please be patient and do
not press any buttons, otherwise automatic tuning will not be
completed.
• If no channels were found during the auto tuning process, a new
menu appears automatically on the screen asking you connect the
aerial. Please connect the aerial (see page 6) and press the
OK
button. The auto tuning process will start again.
Language
Svenska
English
Nederlands
Français
Select language
Norsk
Confirm [
t
]
Select [
–
2
+]
Country
Schweiz/Suisse/Svizzera
Italia
Select Country
Norge
Sverige
–
Confirm [
t
]
Select [
–
2
+]
Do you want to start automatic
First please connect aerial
tuning?
No
Initial Set Up
Yes
Confirm [
t
]
Select [
–
2
+]
End
Auto Tuning
No channel found
Please connect aerial
OK
Confirm [
t
] End
continued...
The operating instructions mentioned here are partial abstracts from the ‘Operating
Instruction Manual’. The page numbers of the ‘Operating Instruction Manual’ remain
as in the manual.
SECTION 1
GENERAL
