Sony FD Trinitron KV-29FX20U, Инструкция по эксплуатации

Страница: 10 / 27

10
First Time Operation - Basic Presetting
Automatically Tuning the TV using the Remote Control
You need to tune the TV to receive channels (TV Broadcast). By following the instructions below, this TV automatically
searches and stores all available channels for you.
After having selected the language, a new menu appears automatically on the TV screen asking you to automatically tune
the TV. However, if you need to change or repeat the tuning afterwards (e.g. when you move house), select the menu
AUTO PROGRAMME in the
(SET UP) menu and proceed in the same way as described below in step 1 or, please refer
to the section "Automatically Tuning the TV using the TV buttons" of this instruction manual.
1
Press the
OK
button on the remote control to select
YES
.
A new menu appears automatically on the screen asking you to
check that the antenna is connected.
2
Confirm that the antenna is connected and then press the OK
button.
The automatic tuning starts and the message "Searching..." flashes
on the screen.
This procedure could take some minutes.
When the automatic tuning is finished, the Programme Sorting menu
appears on the TV screen.
Notes: • To stop the automatic tuning, press the MENU button.
• If you stop the automatic tuning by pressing the MENU
button, the Programme Sorting menu does not appear
automatically on the TV screen.
First Time Operation - Basic Presetting
Do you want to start
automatic tuning?
YES
NO
Do you want to start
automatic tuning?
YES
NO
Please confirm that
antenna is connected
CONFIRM
AUTO PROGRAMME
PROGRAMME:
SYSTEM:
CHANNEL:
Searching...
01
I
C 21
01
Select Channel:
Select new position:
Confirm:
Exit:
PROGRAMME SORTING
PROGR
PROGRAMME:
CONFIRM
MENU
03
S
RM 887
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
K