- 9 -
NOISE REDUCTION
The
“Noise
Reduction”
option
in
the
“Detail
Set
Up” menu allows you to automatically reduce
the picture noise visible in the broasdcast
signal.
To do this: after selecting the option, press
.
Then press
or
to select
Auto
. Finally
press
OK
to confirm and store.
To cancel this function afterwards, select “Off”
instead of “Auto” in the step above.
AV2 OUTPUT
The “AV2 Output” option in the “Detail Set
Up”
menu
allows
you
to
select
the
source
to
be
output from the Scart connector
:
2/
q
in
order
you
can
record
from
this
Scart
any
signal
coming from the TV or from external
equipment connected to the Scart connector
:
1/
or front connectors
3 and
3.
If your VCR supports SmartLink, this
procedure is not necessary.
To do this: after selecting the option, press
.
Then press
or
to select the desired
output signal:
TV, AV1, AV3
or
AUTO
.
If you select “AUTO”, the output signal
will always be the same one that is
displayed on the screen.
If you have connected a decoder to the
Scart
:
2/
q
or to a VCR connected to
this
Scart,
please
remember
to
change
back
the
“AV2
Output”
to
“AUTO”
or
“TV”
for
correct unscrambling.
Level 1
Level 2
Level 3 / Function
continued...
Set Up
Language/
Country
Auto T
uning
P
rogramme Sorting
P
rogamme Labels
A
V P
reset
Manual P
rogramme P
reset
Det
ail Set Up
OK
Det
ail Set Up
Noise Reduction:
A
V2 Output:
R
G
B Centring:
Pictur
e Rot
ation:
Auto
TV
0
0
OK
Picture
Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/
Country
Auto T
uning
P
rogramme Sorting
P
rogamme Labels
A
V P
reset
Manual P
rogramme P
reset
Det
ail Set Up
OK
Det
ail Set Up
Noise Reduction:
A
V2 Output:
R
G
B Centring:
Pictur
e Rot
ation:
Auto
TV
0
0
OK
Picture
Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the
“Set Up” menu allows you to:
a)
Preset
channels
or
a
video
input
source
one
by
one
to
the
programme
order
of
your
choice.
To do this:
1
After selecting the ”Manual Programme Preset” option, press
then with
Programme
option highlighted press
. Press
or
to select on which programme
number
you
want to preset the channel (for VCR, select programme number “0”). Then press
.
2
The following option is only available depending on the country you have selected
in the “Language/Country” menu.
After selecting the
System
option, press
. Then press
or
to select the TV
Broadcast system (
B/G
for western European countries or
D/K
for eastern European
countries). Then press
.
3
After selecting the
Channel
option, press
. Then press
or
to select the channel
tuning (“
C
” for terrestrial channels or “
S
” for cable channels). Next press
. After that,
press
the
number
buttons
to
enter
directly
the
channel
number
of
the
TV
Broadcast
or
the
channel of the VCR signal. If you do not know the channel number, press
or
to
search for it. When you have tuned the desired channel, press
OK
twice to store.
Repeat all the above steps to tune and store more channels.
b)
Label a channel using up to five characters. To do this: Highlighting the
Programme
option, press the
PROGR +/-
button to select the
programme
number
with
the
channel
you
wish
to
name.
When
the
programme
you
want
to
name appears on the screen, select the
Label
option and press
. Next press
o
r
to
select a letter, number or “-“ for a blank. Press
to confirm this character.
Select
the
other
four characters in the same way. After selecting all the characters, press
OK
twice to store.
c)
Normally
the
automatic
fine
tuning
(AFT)
is
operating,
however
you
can
manually
fine
tune
the TV to obtain a better picture reception in the case that the picture is distorted.
To
do
this:
while
watching
the
channel
(TV
Broadcast)
you
wish
to
fine
tune,
select
the
AFT
option and press
. Next press
or
to adjust the fine tuning between -15 and +15.
Finally press
OK
twice to store.
d)
Skip any unwanted programme numbers when they are selected with the PROGR +/- buttons. To do this: Highlighting the
Programme
option, press the
PROGR +/-
button to select the
programme number you want to skip. When the programme you want to skip appears on
the screen, select the
Skip
option and press
. Next press
or
to select
Yes
. Finally
press
OK
twice to confirm and store.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
e)
View
and
record
correctly
scrambled
channels
when
using
a
decoder
connected
directly
to
the Scart
:
2/
or through a VCR.
This
option
is
only
available
depending
on
the
country
you
have
selected
in
the
“Language/
Country” menu.
To
do
this:
select
the
Decoder
option
and
press
. Next
press
or
to
select
On
. Finally
press
OK
twice to confirm and store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
S
Level 1
Level 2
Level 3 / Function
Set Up
Language/
Country
Auto T
uning
P
rogramme Sorting
P
rogamme Labels
A
V P
reset
Manual P
rogramme P
reset
Det
ail Set Up
OK
Set Up
Language/
Country
Auto T
uning
P
rogramme Sorting
P
rogamme Labels
A
V P
reset
Manual P
rogramme P
reset
Det
ail Set Up
OK
Picture
Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
