masterpage:Right4
filename[G:\_Upload\3073074111\307307411MVCFD100UC\02GB-
MVCFD100UC\04bas.fm]
BBBB
P
lay
b
a
ck
29
model name1[MVC-FD100/200]
[3-073-074-11(1)]
Step 1
Installing the USB driver to the computer (page 29)
Perform this step only when you view images on your computer for the
first time.
Step 2
Connecting your camera to your computer using the USB cable
(page 30)
Step 3
Viewing images on Windows (page 32)
For Windows XP users
You do not have to install a USB driver. Windows XP recognizes the camera as a
drive as soon as it is connected it to the computer using the USB cable. Begin the
procedure from
Step 2
.
The operation below is explained using Windows Me. The window screen and
operation method may be different depending on the type of OS.
Before connecting your camera to your computer, install the USB driver to the
computer. The USB driver is included with the application software in the CD-ROM
which is supplied with your camera.
See “If the Removable Disk does not appear” (page 33) for corrective measures if the
USB cable was connected before installing the driver and the driver software could
not be installed correctly.
General procedure for viewing images
Step 1 Installing the USB driver to the computer
For Windows 98, Windows 98SE, Windows 2000, and Windows Me
users
Do not connect your camera to your computer yet. Be sure to
complete installation of the USB driver before connecting your
camera to the computer. If you connect the USB cable first, you will
be unable to install the USB driver properly.
01cov.book Page 29 Thursday, November 29, 2001 1:20 PM