Basic Functions
FCB-EH6300(GB) A-E23-100-13(1)
1
LR Reverse
This function reverses the video output from the
camera horizontally.
Freeze
This function captures an image in the field memory of
the camera so that this image can be output
continuously.
Note
Because communication inside the camera is based on V cycle, the
captured image is always the one 3V to 4Vs after the sending of a
Command. Thus, you can not specify a time period after sending
EVEN, ODD or a Command.
Memory (Position preset)
Using the position preset function, 16 sets of camera
shooting conditions can be stored and recalled.
This function allows you to achieve the desired status
instantly, even without adjusting the following items
each time.
• Zoom Position
• Digital Zoom On/Off
• Focus Auto/Manual
• Focus Position
• AE Mode
• Shutter control parameters
• Iris control parameters
• Gain control parameters
• Exposure Compensation On/Off
• Exposure Level
• Backlight Compensation On/Off
• Auto Slow Shutter On/Off
• White Balance
• R/B Gain
• Aperture Control
• ICR On/Off
• Defog
• Wide-D On/Off
• Wide-D Parameter
• VE On /Off
• VE Parameter
• Minimum Shutter Mode
• Minimum Shutter Limit
Custom Preset
As with the position preset function, the camera
shooting conditions can be stored and recalled. The
settings are recalled when the power is turned on.
For setting items, see the “Initial Settings, Custom Preset
and Backup” section on page 24.
User Memory Area
This is the memory area with 16-byte capacity which
users can overwrite freely.
This can be used as a Serial No. for individual
recognition.
Note
Rewriting of memory is not unlimited. Be careful to avoid using the
memory area for such as unnecessary tasks as rewriting the
contents of the memory for every operation.
Register Setting
The camera’s initial settings can be changed by the
register setting command.
Register Setting Command:
8x 01 04 24 mm 0p 0q FF
mm: Register No. (=00 to 7F)
pq: Register Value (=00 to FF)
Register Inquiry Command:
8x 09 04 24 mm FF
mm: Register No.
y0 50 0p 0p FF
pp: Register Value
(returned from the camera.)
The register setting items and No. are as follows.
For details, see “Register Setting” on page 54.
Baud Rate: 00
Communication speed can be changed.
Monitoring Mode: 72
The output mode can be set.
LVDS Mode: 74
LVDS output mode can be set.
Zoom Limit: 50 (Wide end), 51 (Tele end)
The Wide and Tele zoom limits can be set.
D-Zoom Max: 52
The maximum digital zoom limit can be set (initial
settinig is 12×).
“StableZoom”: 53
ON/OFF can be set. (initial setting is OFF.)
For details, see “StableZoom” on page 12.
FocusTrace: 54
When you want to prioritize zoom speed, set
FocusTrace to Off to minimize the transition time
between Wide and Tele zoom (although the image
may be blurred because focus is not tracked).
FocusOffset: 55
Placing a dome cover in front of the camera may
cause the focal distance of the camera to change.
Especially at the Tele end, this effect exceeds the AF
range, so focus cannot track, although it responds
to changes in this value.
For details, see “Register Setting” on page 54.
AE parameter change during VE On, Defog On: 58
ON/OFF can be set. (initial setting is ON.)
