Sony ExwaveHAD DXC-C33P, Инструкция по эксплуатации, Страница: 23 / 194

23 GB
SCENE FILE Menu
Ad
ju
st
ing an
d Se
tti
ng W
ith
M
e
nu
s
SC. PHASE ROUGH
Roughly adjusts the subcarrier phase by
setting to 0° or 180°.
SC. PHASE FINE
Finely adjusts the subcarrier phase within
the range from –127 to +127.
When an external sync signal (HD/VD
signal) is input, the following items appear:
Adjusts the horizontal phase to synchronize
the camera operation with the reference
signal.
H. PHASE
Adjust the level within the range from –20 to
+127.
Turn on the external sync signal generator
after all equipment is switched on.
OUT
Functions as the output jack.
SIGNAL
Selects the output signal from the EXT
SYNC jacks.
HD/VD: Outputs the HD/VD signal.
C. SYNC: Outputs the composite sync
signal.
SCENE FILE Menu
The SCENE FILE is used to set the preset
menu settings.
The camera has two memory files (A or B)
for storing the menu settings. You can store
a different type of setting into each file, and
switch to the file most suitable for the
shooting conditions quickly. The currently
selected memory file is shown in the upper
right corner of the on-screen menu.
Selects the file A or B.
Selects the setting to be stored into the file
you select with FILE SELECT, and stores
the setting.
STANDARD: Suitable for a camera used as
a permanent fixture.
MICROSCOPE: Suitable for a camera for
a microscope.
FULL AUTO: Automatically adjusts
settings.
STROBE: Suitable for stroboscopic
shooting.
FILE B (or A) : When copying the settings
between two files.
Note
FILE SELECT
LOAD
<SCENE FILE>
>FILE SELECT
LOAD [A]
A
Select Back
MENU