Sony Exmor HXCU-D70, Руководство по эксплуатации

Страница: 24 / 36

24
Setup Menu
<MONITOR 2>
C04
LEVEL GATE ---, 1&2, 1, 2, OFF 1&2: Displays level gate 1&2
1: Displays level gate 1
2: Displays level gate 2
---: Displayed when camera not connected,
video output not set to CAMERA, or video
output is set to CAMERA and GATE MARKER
is ON (display only)
Y LEVEL1 0 to 108% 49 61 Level gate 1 minimum and maximum detection
levels settings
–99 to 99 –25 Level gate 1 zebra range settings
Y LEVEL2 0 to 108% 74 108 Level gate 2 minimum and maximum detection
levels settings
–99 to 99 –25 Level gate 2 zebra range settings
GATE MARKER ---, ON, OFF Gate signal display on/off settings
---: Displayed when camera not connected
(display only)
–99 to 99 0 Gate signal level settings
MODULATION ---, ON, OFF 4:3 aspect ratio mask function on/off settings
when EDGE CROP is ON
---: Displayed when camera not connected
(display only)
–99 to 99 0 Mask video level settings
MARKER ON, OFF Marker signal on/off settings
4:3 , 13:9, 14:9, EU VISTA, VISTA,
CINEMA, FOLLOW DC
Superimposed marker signal selection
<MIC/AUDIO>
C05
CAM MIC GAIN Microphone gain settings
CH1 ---, 20, 30, 40, 50, 60 dB Settings vary depending on microphones
---: Displayed when camera not connected
(display only)
CH2 ---, 20, 30, 40, 50, 60 dB
AUDIO OUTPUT Audio output level settings
CH1 LEVEL –20, 0 , +4 dBu CH1 output level settings
CH2 LEVEL –20, 0 , +4 dBu CH2 output level settings
<INTERCOM>
C06
SYSTEM I/F 4WIRE , RTS, CLEAR COM Intercom interface (D-sub 25-pin) settings
TERMINATION ( OFF ), ON, OFF Connects to a 200
Ω
terminator, if ON is
selected while 2-wire intercom interface (RTS
or CLEAR COM) is used
(OFF): Displayed when 4WIRE is selected in
SYSTEM I/F (display only)
PGM INPUT –20, 0 , +4 dBu PGM input level settings
CCU CONFIGURATION
Page name
Page No.
Item Settings Description