Sony DXF-701, Руководство по обслуживанию

Страница: 6 / 36

2-2 DXF-701 (UC)
DXF-701CE (CE)
SECTION 2
SERVICE INFORMATION
2-1. BOARD LAYOUT
2. Remove the slide ring as shown in Figure.
Remove two screws and remove the CRT/DY ASS’Y
from outside holders B and T.
MAIN board
SUB board
LED(B) board
LED(A) board
2-2. REPLACEMENT OF MAIN PARTS
2-2-1. Notes on Replacement of MAIN Board
To replace the MAIN board, perform adjustment referring
to Section 3.“ALIGNMENT”.
2-2-2. Replacement of CRT/DY Ass'y
Note: If a deflection yoke is replaced, you should
replace assembly of CRT and deflection yoke
(CRT/DY ASS’Y).
1. Remove four screws as shown in Figure and remove
the bottom case.
Outside holder T
Outside holder B
CRT/DY Ass'y
Slide ring
Screws(BTP3
X
12)
3. Untie two strings and remove an adhesive tape and
Cable Holder.
String
String
Cable holder
Adhesive tape
2-1 (E)
Screws(B3
X
8) Screws(B3
X
8)
Bottom case