32
Important Notes on Operation
Important Notes
on Operation
Notes on Using the
Receiver
• The digital wireless microphone system
product must be used within a
temperature range of 0 °C to 50 °C
(32 °F to 122 °F).
• Operating the receiver near electrical
equipment (motors, transformers, or
dimmers) may cause it to be affected by
electromagnetic induction. Keep the
receiver as far from such equipment as
possible.
• The presence of the lighting equipment
may produce electrical interference over
the entire frequency range. Position the
receiver so that interference is
minimized.
• To avoid degradation of the signal-to-
noise ratio, do not use the receiver in
noisy places or in locations subject to
vibration, such as the following:
- near electrical equipment, such as
motors, transformers or dimmers
- near air conditioning equipment or
places subject to direct air flow from
an air conditioner
- near public address loudspeakers
- where adjacent equipment might
knock against the tuner
Keep the receiver as far from such
equipment as possible or use buffering
material.
On Cleaning
• If the receiver is used in a very humid or
dusty place or in a place subject to an
active gas, clean its surface as well as the
connectors with a dry, soft cloth soon
after use. Lengthy use of the receiver in
such places or not cleaning it after its use
in such places may shorten its life.
• Clean the surface and the connectors of
the receiver with a dry, soft cloth. Never
use thinner, benzene, alcohol or any other
chemicals, since these may mar the
finish.
Transmitter software version
If the software version is not suitable for use
with this receiver, the wireless remote
control and encrypted transmission
functions may not function. Refer to the
following tables for transmitter software
versions that are compatible with this
receiver. A software update may be
necessary to enable proper functioning. For
details on software updates, contact your
Sony service representative.
For details on confirming the software version, refer
to the operating instructions for each transmitter.
Transmitter Model No.: U3040,
U4250
Transmitter Model No.: Other
Model name
Software
version
DWM-01
Ver 1.12 or later
DWT-B01/DWT-P01
(Serial No. 10999 or
below)
Ver 1.22 or later
DWT-B01 (Serial
No. 11001 or above)
Ver 2.13 or later
DWT-P01 (Serial
No. 11001 or above)
Ver 2.12 or later
Model name
Software
version
DWM-01
Ver 1.12 or later
DWT-B01
Ver 2.13 or later
Содержание DWRS02D/14
Страница 36: ...Sony Corporation ...