Sony DWM-02, Руководство по эксплуатации

Страница: 18 / 36

18 Using the Encrypted Transmission Function
For details on receiver operations, refer to the
operating instructions supplied with the
receiver.
When you select REMOTE:
The microphone searches for a
receiver that it has been paired with.
After the microphone detects the
receiver, the microphone exchanges
the encryption key with receiver and
encrypted transmission begins.
Using Password Mode
(PASSWORD)
Set this mode when multiple microphones/
transmitters are paired with multiple
receivers for encrypted transmission.
If both microphones/transmitters and
receivers are set with the same user-
designated password, the audio signal can
be decoded. This mode is useful when
multiple microphones/transmitters and
receivers are used as a single group, or
when the audio signal from one
microphone/transmitter is received by
multiple receivers at the same time.
1
Hold down the SET button until the
item to be set flashes in the
ENCRYPTION indication on the
microphone.
2
Press the + or – button repeatedly to
select PASSWORD, and then press the
SET button.
3
Input a password of up to eight
characters on the microphone.
To enter a password, use the procedure
described in “Naming of Microphone
(NAME)” on page 21.
4
Set the encrypted transmission
function setting on the receiver to
PASSWORD.
5
Set the same password that was set on
the microphone.
For details on receiver operations, refer to the
operating instructions supplied with the
receiver.
It is recommended that you change the
password periodically.
USB cable (supplied)
USB adapter
cable
(supplied)
Note