Sony DVP-S3000 Operating Instructions / Mode d’emploi, Руководство по обслуживанию

Страница: 8 / 81

– 8 –
6-2. Cleaning Spindle Motor Turntable
1) Remove the tray. (Refer to 2-6)
2) Clean the spindle motor turntable if disc antiskid rubber
(black) is dirty. (See Fig.10)
6-4. Deformation of Insulator
1) Assemble the spindle base into the base unit.
2) Lock with 4 shoulder screws. (See Fig.12)
3) Check if 4 insulators deformed. (See Fig.12)
6-3. Aligning Phase of Cam Gear and
Drive Gear
1) Align triangle marks when assembling the cam gear and
drive gear. (See Fig.11)
6-5. Note on connecting OPT Harness
1) The optical pick-up could be destroyed unless the OPT
harness is connected normally to the connector. (See Fig.13)
Fig. 10
Fig. 12
Fig. 11 Fig. 13
Spindle motor
Turntable
Drive gear Cam gear
Align triangle marks.
Four step screws
Two insulators
Two insulators
Insulator
Good NG
Good NG
OPT harness
Connector