1-4
17
Si
m
p
le
St
art
G
u
id
e
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (
1
~
3
) shown below.
Be sure to connect the power cord last.
To change the aspect ratio for the
connected TV
Depending on the disc and the TV type
(standard 4:3 screen TV or wide screen TV),
the image may not fit the TV screen.
If this happens, change the aspect ratio
(page 75).
When connecting to a TV that accepts
progressive 480p (525p) format signals
You need to use the COMPONENT VIDEO
OUT jacks to view progressive signals. Hook
up your TV using pattern
C
on page 20, and
then run Quick Setup on page 29.
To change the color system (DVP-NS915V
only)
The color system of the player can be set to
NTSC or PAL. If the on-screen display does
not appear on the TV, change the color
system of the player to match the color
system of the connected TV (NTSC or PAL).
To change the color system, hold
"
/
1
down
for a few seconds while pressing
X
on the
player.
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL OPTICAL
1
2
AUDIO
L
R
VIDEO
LINE OUT
S VIDEO OUT
1
2
Y
PR
SCAN SELECT
PB
COMPONENT VIDEO OUT
SELECTABLE
INTERLACE
PROGRESSIVE
5.1CH OUTPUT
W O O F E R
L
R
FRONT
REAR
C E N T E R
VIDEO
AUDIO
INPUT
L
R
(yellow)
(white)
(red)
1
2
AUDIO
L
R
VIDEO
LINE OUT
to LINE OUT
(VIDEO)1 or 2
to audio input
1
Audio/video
cord (supplied)
2
Power source
to video input
to LINE OUT
L/R (AUDIO)1
or 2
CD/DVD Player
TV
3
Power source
l
: Signal flow
,
continued
18
z
Hints
• To check the current setting of the player’s color
system, press
"
/
1
. The power indicator lights up
in green. If “NTSC” appears on the front panel
display, the color system of the player is set to
NTSC. If not, the color system is set to PAL.
• When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT (VIDEO) 1/2 jack on the player to the
TV’s video input jack, and connect the LINE
OUT L/R (AUDIO) 1/2 jacks to the TV’s audio
input jack.
19
Si
mp
le
St
art
Gu
id
e
Step 4: Playing a Disc
Example: DVP-NS755V
A
Turn on the TV.
B
Press
[
/
1
on the player.
C
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
D
Press
A
on the player to open the
disc tray.
E
Place the disc on the tray with the
playback side facing down.
F
Press
H
.
The disc tray closes and the player begins
playing the disc.
After step 6
Depending on the disc, a menu may be
displayed on the TV screen. If so, select the
item you want from the menu and play the
DVD VIDEO (page 38) or VIDEO CD disc
(page 40).
To stop playing
Press
x
.
To remove the disc
Press
A
.
To turn off the player
Press
[
/
1
. The player enters standby mode
and the power indicator lights up in red.
With the playback side facing down
20
Hookups
Hooking Up the Player
Follow steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, disconnect the power cords, check that you have all of the supplied accessories,
and insert the batteries into the remote (page 16).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns
A
through
C
, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver). In order to view progressive signal pictures with a
compatible TV, projector, or monitor, you must use connection
C
.
B
A
C
INPUT
S VIDEO
P
R
P
B
Y
COMPONENT
VIDEO IN
VIDEO
AUDIO
INPUT
L
R
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL OPTICAL
1
2
AUDIO
L
R
VIDEO
LINE OUT
S VIDEO OUT
1
2
Y
PR
SCAN SELECT
PB
COMPONENT VIDEO OUT
SELECTABLE
INTERLACE
PROGRESSIVE
5.1CH OUTPUT
W O O F E R
L
R
FRONT
REAR
C E N T E R
Audio/video
cord
(supplied)
l
: Signal flow
Component
video cord
(not supplied)
(yellow)
TV, projector or AV
amplifier (receiver)
CD/DVD player
TV, projector or AV
amplifier (receiver)
(green)
S VIDEO cord
(not supplied)
TV, projector or AV
amplifier (receiver)
(red)
(blue)
(yellow)
(green)
(blue)
(red)
to LINE OUT (VIDEO)1 or 2
to COMPONENT
VIDEO OUT
to S VIDEO OUT 1 or 2