Sony DVP-NS400D, Руководство по эксплуатации

Страница: 32 / 92

32
6
Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 68).
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in pages 23 to 27
(
through ). Each of these are the default settings and do not need to be adjusted when
you first connect the player. Refer to page 68 for using the Setup Display.
Audio Connection (pages 23 to 27)
No additional settings are needed.
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 73).
•
If “ENHANCED” or “SOFT” is selected in “CENTER SPEAKER EQ,” it makes the spoken
track sound clear (page 73).
•
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect the amplifier (receiver) that
conforms to the 96 kHz sampling frequency (page 74).
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 73).
Enjoying the surround sound effects
Item You select Page
DISTANCE
BALANCE
LEVEL Set according to the connected
speakers 76
Item You select Page
DOWNMIX DOLBY SURROUND 73
DIGITAL OUT ON 73
Item You select Page
DOWNMIX DOLBY SURROUND 73
B D
A
B-1
B-2 C-2 D-2
C-1
D-1