Sony DVP-NS300, Руководство по обслуживанию

Страница: 19 / 111

1-12
50
8
Press X / x to select a geographic area as
the playback limitation level, then press
ENTER.
The area is selected.
When you select “OTHERS
t ,” select
and enter the standard code in the table on
page 51 using
X
/
x
.
9
Press ENTER.
The selection items for “LEVEL” are
displayed.
10
Select the level you want using X / x ,
then press ENTER.
Parental Control setting is complete.
The lower the value, the more strict the
limitation.
If you make a mistake
Press O RETURN to go back to the
previous screen.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
To turn off the Parental Control
function and play the DVD after
entering your password
Set, “LEVEL” to “OFF” in Step 10.
To change the password
1
In Step 7, select “CHANGE
PASSWORD
t ” using x , then press
ENTER.
The display for entering the password
appears.
2
Follow Step 6 to enter a new password.
CUSTOM SETUP
PARENTAL CONTROL
LEVEL: OFF
OFF
STANDARD:
CHANGE PASSWORD
8:
7:
6:
5:
NC17
R
CUSTOM SETUP
PARENTAL CONTROL
LEVEL:
STANDARD:
CHANGE PASSWORD
USA
4: PG13
Us
ing V
a
ri
ous
Ad
ditiona
l Func
tions
51
1
Insert the disc and press H .
The Control Bar appears.
2
Enter your 4-digit password using X / x to
select the digit, followed by
c
to move
the cursor. Then press ENTER.
The player starts playback.
z
If you forget your password, remove the disc and
repeat Step 1 to 5 of “Limiting playback by children.”
When you are asked to enter your password, enter
“199703,” then press ENTER. (Press
c after the 4th
digit to allow the entire 6 digit number to be entered.)
The display will ask you to enter a new 4-digit
password. After you enter a new 4-digit password in
Step 6, replace the disc in the player and press
H .
When the Control Bar appears, enter your new
password.
Note
When you play DVDs which do not have the Parental
Control function, playback cannot be limited on this
player.
Area Code
Playing the disc for which Parental
Control is set
PASSWORD
Standard Code
number
Argentina 2044
Australia 2047
Austria 2046
Belgium 2057
Brazil 2070
Canada 2079
Chile 2090
China 2092
Denmark 2115
Finland 2165
France 2174
Germany 2109
Hong Kong` 2219
India 2248
Indonesia 2238
Italy 2254
Japan 2276
Korea 2304
Malaysia 2363
Mexico 2362
Netherlands 2376
New Zealand 2390
Norway 2379
Pakistan 2427
Philippines 2424
Portugal 2436
Russia 2489
Singapore 2501
Spain 2149
Sweden 2499
Switzerland 2086
Taiwan 2543
Thailand 2528
United Kingdom 2184
Standard Code
number
52
Operation Sound Effects
(Sound Feedback)
The player beeps when the following
operations are performed.
The default setting of the Sound Feedback
function is set to off.
1
Press POWER on the player, then press
[ / 1 on the remote.
The power indicator lights up in green.
When there is a disc in the player, press
A
and remove the disc. Then press
A
again to close the disc tray.
2
Press and hold X on the player for more
than two seconds.
Yo u will hear one beep and the Sound
Feedback function is turned on.
To turn off the Sound Feedback
function
When there is no disc in the player, press and
hold
X on the player for more than two
seconds. You will hear two beeps and the
Sound Feedback function is turned off.
Operation Operation sound
Power is turned on One beep
Power is turned off Two beeps
H
is pressed One beep
X is pressed Two beeps
Playback is stopped One long beep
Operation is not possible Three beeps
To set Sound Feedback
[ / 1
A
X
POWER
Power Indicator
Us
ing V
a
ri
ous
Ad
ditiona
l Func
tions
53
Controlling Your TV with
the Supplied Remote
By adjusting the remote signal, you can
control your TV with the supplied remote.
1
Hold down TV
[
/
1
, and enter your TV’s
manufacturer’s code (see the table
below) using
C / X / x / c .
2
Release TV
[
/
1
.
Manufacturer’s codes of controllable
TVs.
Notes
•
If you enter a new manufacturer’s code, the code
previously entered will be erased.
•
When you replace the batteries of the remote, the
code you have set may be reset to the default setting.
Set the appropriate code again.
Controlling the TV
By adjusting remote signal, you can control
the sound level, input source, and power
switch of your TV with the supplied remote.
You can control your TV using the buttons
below.
Note
Depending on the units being connected, you may not
be able to control your TV or to use some of the
buttons.
Controlling TVs with the remote
Manufacture Press C / X / x / c to input code
Sony (default) X X
General Electric X C
JVC
x X
Panasonic c c
Philips X c
Quasar
c x
RCA X C
Samsung x c
Sanyo
X x
Sears c C or X C
Sharp c x
Toshiba
c C
Zenith c X
TV [ / 1
C / X / x / c
By pressing Yo u can
TV
[
/
1
Turn the TV on or off
VOL (volume)
+/– Adjust the volume of the TV
TV/VIDEO Switch the TV’s input source
between the TV and other input
source
TV [ / 1
VOL +/–
TV/VIDEO
www. xiaoyu163. com
QQ 376315150
9 9
2
8 9
4 2
9 8
TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com