Sony DVCAM DSR-PD150, Руководство по обслуживанию

Страница: 185 / 279

5-41
2-2-3. Damper Assembly, Cassette Compartment
Assembly and Extension Spring
Remove the
“2-2-1. Tape Fall Stopper”
Removing method : Remove in the order of
1
,
2
,
3
,
4
,
5 .
1
2
3
3
2
4
5
5
Extension
spring
Damper assembly
Cassette compartment arm (S2)
Cassette compartment
assembly
Two
hooks
Remove the claw.
Cassette compartment arm (T2)
Cassette compartment arm (S1)
Cassette compartment arm (T1)
1
Lock plate
3
Short down the cassette
compartment assembly.
2
Move up.
3
Shaft
Cassette
compartment
arm (T2)
1. Move the lock plate in the arrow direction.
2. Move up the cassette compartment assembly.
3. While shorting-down the cassette compartment
assembly, move the arms (T2) and (S2) inside,
and remove the left and right shafts.
Details diagram on removal of
cassette compartment assembly
4. Move forward until the part disconnects.
Attaching method
: Attach in the order of 1
,
2
,
3
,
4 .
Note:
Be careful not to deform the cassette compartment.
1. Insert the left and right shafts of the cassette compartment arms
(S1) and (T1) into the chassis.
2. Push down the cassette compartment assembly in the direction
of arrow
2
.
3. Insert the left and right shafts of the cassette compartment arms
(S2) and (T2) into the chassis.
4. Attach the damper assembly.
5. Attach the two extension springs.
2
3
1
4
4
Damper assembly
Shafts
Claw
Damper assembly
Damper arm
Two hooks
Damper arm
Cassette compartment
arm (T2)
Attach the claw.
Hook the hook.
Cassette compartment arm (T1)
(S1 opposite side.)
Cassette compartment arm (T2)
(S2 opposite side.)
Take note of the position at which the
shaft is fixed.
(The part should be visible from the
chassis side.)
Take note of the position at which the shaft is fixed.
(The damper arm should also be fixed to the same shaft.)
Hooking direction of the extension
spring.
Details diagram on attachment of
damper assembly
Note: To attach, hook rear hook first.