34
Chapter 4
Menu Settings
Chapter 4
Menu Settings
Menu contents (Continued)
Menu Contents
DISPLAY CONTROL [Display]: Settings related to
indications on the monitor and the unit
Description of settings
SUB STATUS [> Sub status]: Select whether or not
superimposing supplementary status information on output
from the VIDEO OUT 2 (SUPER) connector to the monitor.
Make the following settings while watching the monitor
screen.
∗
WHITE [WITH BKGD] [>> White]: White characters on black
background
BLACK [WITH BKGD] [>> Black]: Black characters on white
background
WHITE/OUTLINE [>> W/outline]: White characters with black
outline
BLACK/OUTLINE [>> B/outline]: Black characters with white
outline
Press the MENU button to confirm the setting and return to
the level 1 of the setup menu.
MENU DISPLAY [> Menu DISP]: Set the type of characters in
menu text superimposed on output from the VIDEO OUT 2
(SUPER) connector to the monitor.
PEAK HOLD [> Peak hold]: Set the peak hold time for audio
level meter.
1.5 SEC [>> 1.5 SEC] to
∗
OFF [>> OFF]: Set the time from
zero (OFF) to 1.5 seconds in steps of 0.1 second.
OVER DISP HOLD [> Hold OVER]: Determine whether or not
to hold the OVER indication display on the audio level
meter once the indication lights.
∗
OFF [>> OFF]: Do not hold the OVER indication display.
ON (HOLD) [>> ON]: Hold the OVER indication display.
Note
With “ON” selected, once the display is held it will remains
held unless you change the setting to “OFF”.
BRIGHTNESS [> Brightness]: Set the brightness of front
panel indicators.
Set brightness as a percentage of the maximum.
∗
100% [>> 100%]
66% [>> 66%]
33% [>> 33%]
ALARM [> ALARM]: Determine whether alarm messages are
issued or not.
∗
ON [>> ON]: Alarm messages are issued.
OFF [>> OFF]: Alarm messages are not issued.
REF. ALARM [> REF. ALARM]: Determine whether alarm
messages related to reference video signal are issued or
not.
ON [>> ON]: Alarm messages are issued.
∗
OFF [>> OFF]: Alarm messages are not issued.
∗
OFF [>> OFF]: Do not superimpose supplementary status
information.
PB FORMAT [>> Format]: Superimpose the recording format
which was used for the tape being played back.
For details of supplementary status information displayed on
the monitor when “PB FORMAT” is selected, see “Displaying
Supplementary Status Information” (page 28).
TIME CODE [Time code]: Settings related to the time
counter
Description of settings
(only on DSR-60)
DF MODE [> DF mode]: Select whether the time counter
operates in drop frame mode or non-drop frame mode.
Normally select drop frame mode, to keep in sync with real
time. The non-drop frame mode is useful for example when
using computer graphics, and working on a frame count
basis.
∗
ON (DF) [>> ON]: Drop frame mode
OFF (NDF) [>> OFF]: Non-drop frame mode
