DSX-GS900
9
Sony CONFIDENTIAL
For Authorized Servicer
4. Rotate the control dial to display the “DEVICE 1” or “DEVICE
2” and press the [PUSH ENTER MENU/ VOICE] button.
(This unit is enters to the pairing standby state, and the BLUE-
TOOTH logo ( ) in the display window of this unit is
fl
ashes)
flashes
5. Operate the BLUETOOTH device you want to pair with this
unit to detect this unit.
BLUETOOTH
pairing
6. Select the model name of this unit displayed on the screen of the
BLUETOOTH device, and perform the pairing.
(During pairing, the BLUETOOTH logo ( ) in the display win-
dow of this unit is lighting state)
Note 2:
If passkey input is required on the BLUETOOTH device, input
“0000”.
Note 3:
“DEVICE 1” or “DEVICE 2” in the display window of this unit
will be changed to the paired device name after pairing is complete.
XXXXXX
DSX-GS900
BLUETOOTH device name
7. The “BLUETOOTH logo” changes from
fl
ashing to lighting and
the connection with the BLUETOOTH device is completed.
BLUETOOTH FUNCTION CHECKING METHOD USING A
SMARTPHONE OR CELLULAR PHONE
1. Required Equipment
• This unit to be tested
• BLUETOOTH compatible smartphone or cellular phone
• BLUETOOTH audio devices (SONY NWZ-A826, or select
from connectable smartphone, cellular phones or audio devices
list)
• Speaker connection (at least Front L/R ch)
• DC power supply (12 V)
2. Preparation
• Con
fi
rm the setting of this unit and note down it.
• Press the [PUSH ENTER MENU/ VOICE] button, rotate the
control dial to select, and determine in the following order, then
con
fi
rm that the BLUETOOTH logo ( ) is
fl
ashing.
“BLUETOOTH”
→
“PAIRING”
→
“DEVICE 1” (or “DEVICE
2”)
• Turn on the BLUETOOTH function of the smartphone or cel-
lular phone.
3. Test Environment
• No other BLUETOOTH device is making a communication in
the periphery (within 20 m).
• No other this unit are supplied with electric power.
• There are no two or more wireless LAN access points in the
periphery (with 50 m) (one is OK).
• The set should be tested in a place such as a meeting room, free
from ambient noise.
• The speaker at the far end should be in a place such as another
meeting room separated acoustically.
4. Setting
Install this unit on the desktop.
Speaker
Approx. 50 cm
Unit
Tester
Approx. 80 cm
5. Precautions
Beware of the following points when conducting the talk-
ing test:
• There is no fault if a talking can be made by adjusting appro-
priately the volume of the telephone of the other party and the
smartphone or cellular phone connected through the BLUE-
TOOTH, besides the setup of this unit.
• The speaker’s voice will become loud naturally if the periphery
is noisy, or become low if quiet (even though the speaker intents
to talk on the same volume level).
• The speaker’s voice will become loud naturally if the other par-
ty’s voice is loud.
– Continued on next page –
SYS SET
2019/10/17 22:00:30 (GMT+09:00)
