T
E
L
L
I
T
E
R
E
C
E
I
V
E
R
GB-17
1.2.1 User Mode
●
Select Driving Mode:
You have an option to choose the positioner’s movement
type: Continuous, Step or Time.
●
Position the antenna with north, south, east and west and
use the
/ ,
/
key to drive motor. key drives to
west, key drives to east,
key drives to north and
key drives to south.
●
If you finished driving of motor, select “
Store current
Position.
” and press
key, to reset new driving motor.
N
No
otte
e
:
The level indicated in the “Signal Status” is only for reference.
The signal quality may be adequate even though the level indicated is
not maximum.
●
Go to Stored Position.
When the stored position is reached then screen displays "
Stop
",
you can now continue with the further operations.
●
Select the Calculate Sat Positions to recalculate the satellite position and
key.
1.2.2 Installer Mode
After checking the positioner’s state, installer should use this
menu. He should set the “
Disable Limits
” before using User
mode.
●
Select the Drive Motor West/East and use the /
keys to drive motor.
key drives to west and key drives to east.
●
Select “
Enable Limit
”, in order to enable “
Set Limit
”.
●
Select “
Disable Limit
”, in order to disable “
Set Limit
”.
●
Select “
Reset Positioner
” and
key to reset positioner.
OPERATING THE RECEIVER
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 17
