GB-10
D
I
G
I
T
A
L
S
A
T
E
L
L
I
T
BASIC FUNCTIONS
1. Display Screen
Before you can view the television program, you must perform the installation.
Therefore you will see only menu images at first.
After the television channels have been programmed, you will see the following picture(banner)
each time you switch channels:
●
Press the
RED (
)
key in view mode.
●
Select the channel by pressing
NUMERICAL (
~
)
keys or
/
keys and select
TV/RADIO
key to move to TV or Radio channel.
You will also see this picture each time you change channels.
When you press
TV/RADIO
key on the Remote Control Unit,
TV
and
RADIO
program are
toggled.
Detailed program information
●
Press the
RED (
)
key twice while you are viewing a program.
First you will see the banner described above.
After the
RED (
)
key is pressed in the second time, detailed information for current program
can be displyed on another banner, if there is more information. When this information is more than
one page,
/
can be used for page up and down.
N
No
otte
e
:
This service depends on service provider.
2. Volume Control
To control the volume level :
●
Press /
keys to adjust the volume level.
●
Press
MUTE
key to turn to silence mode.
●
Press
MUTE
key again or /
keys in order to cancel the mute function.
Left Audio Status
Program Information
Current Favorite
The number of soundtrack in current channel
Signal Status
Parental Lock
Channel Number
Channel Name
Right Audio Status
CAS Name
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 10
