Sony DSR-250, Руководство по обслуживанию

Страница: 286 / 322

1-2 (E)
DXF-801/801CE
CN2
CN3
CRT/DY assembly
High-voltage cable
Orange
Black
MAIN board
CRT socket
CN4
CN5
5. Disconnect four connectors CN2, 3, 4 and 5 on the
MAIN board and high-voltage cable. Disconnect the
CRT socket from the CRT/DY assembly.
n
In disconnecting, carefully pull the CRT socket
backward, as the pins of CRT/DY assembly is liable to
bend.
6. When installing a new CRT/DY assembly, reverse the
above procedures.
n
In reconnecting the CRT socket, be sure to match a
projection of the CRT socket with a mark of the CRT/
DY assembly.
3. Remove the slide ring. Remove two screws and remove
the CRT/DY assembly from outside holders B and T.
4. Untie two strings and remove an adhesive tape and a
cable holder.
Outside holder T
Outside holder B
CRT/DY assembly
Slide ring
Screws (BTP3
x
12)
String
String
Cable holder
Adhesive tape
CRT socket CRT/DY assembly
Projection Mark
1-2. Replacement of Main Parts