Preread Editing Capability
Thanks to newly developed digital processing, the DSR-2000A
offers preread editing capability* never before offered on a
1/4-inch(6.35mm)VTR.Sinceprereadheadsarepositionedahead
ofrecordheadsonthedrum,theyscanpreviouslyrecordedvideo
andaudiosignalsthatarethenrecordedbackontothesametrack.
This featureprovides many advantages such as A/B roll editing
(MIX and WIPE only) using two VTRs and a sound-on-sound
capability as well as audio cross-fade function for clean audio
transitions at editing points. In addition, audio mix/swap and
over-dubbing of audio are available without the delay between
videoandaudio.
*Not available for SDTI (QSDI) and i.LINK interfaces as these handle
compressed signals.
RS-422A
Video
Out
Video
In 1
Ref.
Out
Ref.
Out
Ref.
In
Video
In 2
Video
Out
Video
In
Audio Out
PGM
Out
Ref.
In
Ref.
Out
Ref. In
Ref. In
Ref. Out
Audio Out
Audio In
Player
Recorder
BVE-2000
Editing Control Unit
Audio Mixer
Video Signal
Audio Signal
Remote Control Signal
RS-422A
RS-422A
MFS-2000 Series
Multi-Format Switchers
DFS-700A
DME Switcher
VTR-to-VTR Editing
The front panel features a built-in Jog/Shuttle dial that provides
convenient two-machine editing without external controllers.
By connecting the DSR-2000A to VTR with an RS-422A or
i.LINK (DV In/Out) interface, an editing system with an editing
precisionof ±0framescanbecreated.
Wide Range of Digital Slow Speed
The DSR-2000A offers a variable speed playback function
with the range of -1 to +1 times. Within this wide range, the
DSR-2000A plays back noiseless digital slow images with
smooth jog sound to make it easy to designate editing
points. This feature can be applied when using any DV (25
Mb/s) formatrecordedtapes.
DMC (Dynamic Motion Control)
Equipped with Sony’s innovative DMC, the DSR-2000A
provides noiseless slow-motion playback from -1 to +1 times
normal speed. For a two-machine editing system, the
DSR-2000A can memorize the variable speed range of a
designatedportionontheplayersideandexecuteediting*with
slow-motion images. Additionally, DMC makes it possible to
control VTRs equipped with Dynamic Tracking (DT™) from
the DSR-2000A.
*The SDI is recommended for DMC editing. The SDTI (QSDI) and i.LINK
interfaces are not suitable for this use, since they handle compressed signals.
DSR-2000A
Front Panel
ExcellentEditingPerformance
Main Features
Preread Editing System
VTR-to-VTR Editing System
■
Simpleandefficientcutediting
■
Superiormulti-generationpictureandsoundqualityviaani.LINKinterface
■
Space-savingdesign
Non-linear Editing System
■
Degradation-freepicture and sound quality by using an SDI or SDTI (QSDI) interface
through the entireproductionprocess
i.LINK (DV I/O)
Player
Recorder
VIDEO/AUDIO
RS-422A
or
DSR-2000A
DSR-2000A
SDI or SDTI (QSDI)
RS-422A
DSR-2000A
Non-linear Editing System
Application Examples
Optimum
Performance
More
Productivity
Greater Efficiency
