82
Your camera cannot delete an image.
•
Cancel the protection (page 39).
•
You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 90).
You have deleted an image by mistake.
•
Once you have deleted an image, you cannot restore it. We recommend that you set protection
on an image (page 38), or set the write-protect switch on the “Memory Stick Duo” to the
LOCK position (page 90) to prevent accidental erasure.
The resizing function does not work.
•
You cannot resize movies and Multi Burst images.
You cannot display a DPOF (Print order) mark.
•
You cannot display DPOF (Print order) marks on movies.
You cannot cut a movie.
•
The movie is not long enough to cut (shorter than about two seconds).
•
Cancel the protection (page 39).
•
Still images cannot be cut.
You do not know if the OS of your computer is compatible with the camera.
•
Check “Recommended computer environment” (page 55) for Windows, and “Recommended
environment” (page 66) for Macintosh.
You cannot install the USB driver.
•
In Windows 2000, log on as Administrator (authorized Administrators) (page 56).
Your computer does not recognize your camera.
•
Turn on the camera (
t
step 2 in
“Read This First”
).
•
When the battery level is low, install the charged battery pack (
t
step 1 in
“Read This
First”
), or use the AC Adaptor (not supplied) (page 15).
•
Use the supplied USB cable (page 58).
•
Disconnect the USB cable from both the computer and the camera, and connect it again
firmly. Make sure that “USB Mode Normal” is displayed (page 58).
•
Set [USB Connect] to [Normal] in the
(Setup) menu (page 52).
•
Disconnect all equipment other than the keyboard and the mouse from the USB connectors of
your computer.
Deleting/Editing images
Computers
