58
Connect the Interface Adaptor (page 15).
• With Windows XP, the AutoPlay wizard
appears on the desktop.
“USB Mode Normal” appears on the screen
of the camera.
When a USB connection is established for
the first time, your computer automatically
runs a program to recognize the camera.
Wait for a while.
* During communication, the access indicators
turn red. Do not operate the computer until the
indicators turn white.
• If “USB Mode Normal” does not appear, set
[USB Connect] to [Normal] (page 52).
• For Windows 98/98SE/2000/Me, follow the
procedure explained in “Stage 4-B: Copying
images to a Computer” on page 60.
This section describes an example of
copying images to a “My Documents”
folder.
Stage 3: Connecting the camera
and your computer
2
To the
(USB)
jack
USB cable
1
To a USB connector
3
To the multi connector
Interface Adaptor
Stage 4-A: Copying images to a
computer
USB Mode
MENU
Switch on
Normal
Access
indicators*